Appendix
Environmental specifications
Item |
|
I | 131 W |
Wall mount kit specifications
Standard dimensions for | mount kits are shown below. |
J | Advanced | 96 W | |
K |
| 0.15 W | |
L Annual Energy Consumption (kWh) | 182 kWh | ||
L | Annual Energy Consumption | Advanced | 133 kWh |
| |||
IMeasured according to IEC 62087 Ed. 2
JFor further information about the Energy Save function, please see related pages in this operation manual
KMeasured according to EN 62301 Ed. 1
Standby power consumption applies when the TV is set to not receive EPG data
LAnnual energy consumption is calculated according to EU Regulation (EU) No 1062/2010 based on operating 4 hours per day for 365 days a year
NOTE
• The power consumption of
Mounting the TV on a wall
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided
8.1 |
|
|
|
|
|
TV | Max 40 |
|
| WALL |
|
WALL MOUNT KIT*1 |
|
|
| ||
Max 340 |
|
|
| ||
|
|
|
|
| |
|
|
|
| WALL MOUNT KIT |
|
200 |
|
|
|
|
|
400 |
| 375 |
|
| WALL MOUNT |
|
| Max |
|
| UNIT |
|
|
|
|
| |
|
|
| 175 |
|
|
|
|
| Max | TV |
|
|
|
|
|
| |
|
|
|
| 18.3 | MOUNTING |
| 600 |
|
| Min 80 | |
|
|
| HOLES | ||
|
|
|
|
|
• | VESA screw hole specs (A - B) in millimeters |
| 600 – 400 |
| |||
• Standard screw |
| M8*2 | |
• | Quantity |
| 4 |
|
|
|
|
IMust be smaller than the shaded area.
JUse 1.25 pitch screws.
SCREW
CABINET |
12 |
DEPTH OF |
MOUNTING HOLES |
with the product. We recommend you to contact qualified service peronnel when installing it. SHARP is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
CAUTION
•Install your wall mount on a solid wall perpendicular to the floor. When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury. Always have two people mount the TV on a wall.
EWall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable one by setting this function to “Yes”.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
NOTE
•Do not mount the TV at an angle.
•Due to the terminal configuration on this TV, when you
•To use this TV mounted on a wall, remove the cable tie as needed.
•Do not use screws that do not comply with the VESA standard screw specifications.
•Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV set.
•Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
•SHARP is not liable for product damage or personal injury when a
Do not install the wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.
68