Sharp LC-80LE646E TV start-up time setting, Individual setting Clock, Quick start Clock setup

Basic adjustment

TV start-up time setting			E When selecting “Yes”			Individual setting — Clock
			Register a four-digit number to use the “PIN”
			function.
	View setting						View setting
			1	Press c/dto select “Yes”, and then press ;.
	Quick start						Clock setup
			2	Enter the four-digit number as a PIN using 0_9
You can reduce the TV’s start-up time after turning			3	numeric buttons.		You can adjust the time manually and change the
on the power with the remote control unit.				Enter the same four-digit number as in step 2 to		clock display.
Go to “HOME” > “TV Menu” > “Setup” > “View				confirm.		Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Quick start”.				• “The system PIN has been changed successfully”		setting” > “Individual setting” > “Clock setup”.
				displays.
		Item	4	Press ;.		Time adjustment
		The TV quickly starts up from standby.
On			NOTE			This function allows you to set the clock manually.
		Around 15 W or more of power
			• As a precautionary measure, make a note of your
		consumption is required during standby.				NOTE
				PIN and keep it in a safe place that children cannot
		The “Quick start” mode will automatically
				reach.		• If you select “No”, the TV will try to get the time for the
		turn on and off depending on the time
			• “0000” cannot be set as the PIN code.			broadcast.
		shift status. If playable data exists on the
Auto (Time shift)			• To view a locked channel, you must enter the PIN (see
		USB storage device registered for time				Time display
				pages 36 and 37 for locking channels from viewing in DTV,
		shift, “Quick start” will be automatically		SAT and ATV mode). When you select a locked channel,
		set to the same status as “On”.				This function allows you to display the clock time in
				a PIN prompt message pops up. Press 6 to display the
Off		Power consumption is small during		PIN input window.		the lower-right corner of the screen.
		standby.
					View setting			Item
NOTE
					Parental rating	On		Displays the clock time.
• You cannot select “Off” in the “Quick start” menu while						On (half-hourly)		Displays the clock time in
time shift is activated. Follow the on-screen instructions			This function allows DTV services to be restricted.					30-minute increments.
to change the “Quick start” settings.			It prevents children from watching violent or sexual			Off		Hides the clock time.
• If you want to clear the playable data, go to “HOME” >
			scenes that may be harmful.
“TV Menu” > “Setup” > “View setting” > “Time shift
			1	Go to “HOME” > “TV Menu” > “Setup” > “View		Time format
setting” > “Clear the Time shift memory” (Page 47).
Individual setting — PIN				setting” > “Individual setting” > “Parental rating”.		You can select the time format (either “24HR” or
			2	Repeat steps 1 to 4 in when selecting “Yes” to
						“AM/PM”) for the clock time.
				the left.

View setting

PIN

Allows you to use a PIN to protect certain settings from being accidentally changed.

Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”.

NOTE

•“Universal viewing” and “Parental approval pref.” are ratings used exclusively in France.

•Refer to page 69 for details about ratings.

NOTE

•PIN input is required when executing “PIN”. The default PIN is “1234”. To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 61).

38