Sharp LC-80LE646E, LC-80LE646S, LC-80LE645E Wireless connection overview, Wireless installation

Network setup

Wireless installation	E How to connect		NOTE
			• When not using “Push button”, perform the settings
Use the wireless LAN USB adapter supplied with the			from “HOME” > “Network setup” > “Manual setup” >
			“Connection type”.
TV.
			• To connect your TV to the internet, you must have a
E Wireless connection overview
			broadband internet connection.
			• If you do not have a broadband internet connection,
			consult the store where you purchased your TV or ask
			your internet service provider or telephone company.
			• There is no need to enter the security key for
			subsequent connections to the wireless network.
			• If your access point is set to a stealth mode (that
	1		prevents detection by other devices), you may not be
		Switch on your router before starting the	able to establish a connection. In this case, disable the
		network installation.	stealth mode on the access point.
 PC	2	Connect the wireless LAN USB adapter	• If you want to change the IP settings manually, go to
			“HOME” > “Network setup” > “Manual setup” > “IP
 Wireless LAN router/access point		(supplied) to the USB 3 (WIRELESS LAN) port on	setup” and follow the on-screen instructions and the
 Wireless LAN USB adapter (supplied)		the rear of the TV.	operation manual of the router.
		• Do not use a wireless LAN adapter other than	• See page 67 to check the supplied SHARP wireless LAN
 Network
		the supplied SHARP wireless LAN adapter, as	adapter specifications.
NOTE		operations cannot be guaranteed.
	3	Go to “HOME” > “Network setup” > “Auto
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the		setup”, and then press ;.
device for best performance.		NOTE
• Make sure the firewalls in your network allows access to		• Follow the on-screen instructions when setting
the TV wireless connection.
		manually.
• Operations cannot be guaranteed when used with
		Go to “HOME” > “Network setup” > “Manual
access points that do not have Wi-Fi® certification.
		setup”.
• A wireless LAN access point is required to connect
	4	Press a/bto select “Wireless”, and then press
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.		;.

5Confirm the WPS location and then press ;to go to the next step.

6Perform “Connection test” after the connection is completed. Press c/dto select “Yes”, and then press ;.

7The connection test result will be displayed on the screen. Follow the on-screen instructions for the settings after this step.

58