Sharp IG-CH2J operation manual Troubleshooting, What to do

Page 15

TROUBLESHOOTING

Problem	WHAT TO DO

• The OPERATION light (blue) does	• Is the AC adapter installed correctly?
not light up.	Connect correctly. (See page E-6)
(The Plasmacluster Ion Generator
does not work.)

ENGLISH

	OPERATION light

•	The FILTER CLEAN light (orange)						•	Filter is getting dirty. Clean the filter.
	is lighting.							(See E-9)
								After cleaning the �� lter, press ON/OFF
								button for 3 seconds.
								button for 3 seconds.



	FILTER CLEAN light

•	The OPERATION light (blue) and						•	Failure
	the FILTER CLEAN light (orange)							Unplug the AC adapter and contact
	are ﬂashing.							the store you purchased or Sharp
								Authori�ed Service Center.

OPERATION light FILTER CLEAN light

E-13

Image 15

Contents IG-CH2J Page English Important Safety Instructions Installation Guidelines Parts Name Back Connection of AC adapter and installation of main unit Installation GuideOperation Press the ON/OFF button to turn onPress the ON/OFF button to turn off Cleaning and Maintenance Remove the dust with a vacuum cleanerWipe off the taint with a soft cloth Press the ON/OFF button for 3 seconds Clean up the filterRemove the filter Set the filter on the main unitGenerating Unit Remove the cleaning brushClean up the needle electrode of the Plasmacluster Ion Remove the louverPin Specifications What to do TroubleshootingPage English Memo English Sharp Corporation of NEW Zealand Limited