Sharp IG-CH2J operation manual Installation Guidelines

Page 5

CAUTIONS CONCERNING OPERATION:

Do not ride the main unit and do not sit on or lean it, it may cause injury or malfunction.

DO NOT block the air intake and/�or air outlet.

DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam.

B.e cautious when cleaning the unit.

Strong corrosive cleansers may damage the exterior.

Do not use items of silicone-containing products* near the unit.

The fluororesin or silicone could get stuck inside the unit, preventing it from producing plasmacluster ions.

If this happens, remove dust from the needle electrode of the Plasmacluster Ion Generating Unit. (See E-10)

*Hair care products (split end coatings, hair mousses, hair treatments, etc.), cosmetics, antiperspirants, antistatic agents, waterproofing sprays, polishes, glass cleaners, chemical absorbed clothes, wax, etc.

ENGLISH

INSTALLATION GUIDELINES:

Avoid using in locations where the unit is exposed to condensation or drastic temperature changes. Appropriate room temperature is between 0-40�ºC.

Avoid locations where grease or oily smoke is generated, otherwise the main unit surface may crack as a result.

E-3

Image 5
Contents IG-CH2J Page English Important Safety Instructions Installation Guidelines Parts Name Back Connection of AC adapter and installation of main unit Installation GuidePress the ON/OFF button to turn off OperationPress the ON/OFF button to turn on Wipe off the taint with a soft cloth Cleaning and MaintenanceRemove the dust with a vacuum cleaner Remove the filter Clean up the filterSet the filter on the main unit Press the ON/OFF button for 3 secondsClean up the needle electrode of the Plasmacluster Ion Remove the cleaning brushRemove the louver Generating UnitPin Specifications What to do TroubleshootingPage English Memo English Sharp Corporation of NEW Zealand Limited