Install Menu
Program
Press “
” or “
” button to select Program. Use “
” or “
” button to select the program number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199.
Band
Band can be selected either C or S. Press “
” or “
”button to set Band.
Channel
Channel can be changed by “
” or “
” button or numeric buttons.
Colour System
Press “
” or “
” button to select Colour System. Use “
” or “
” button to change the colour system to PAL, PAL 60, SECAM or AUTO.
Sound System
Press “
” or “
” button to select Sound System. Press “
” or “
” button to change the sound system to BG,DK, I, L or L’.
Fine Tune
Press “
” or “
” button to select Fine Tune. Press “
” or “
” button to adjust the tuning.
Search
Press “
” or “
” button to select Search. Use “
” or “
” button to start programme searching. You can also enter the desired frequency using the numeric buttons while Search item is highlighted.
Store
Press “
” or “
” button to select Store. Press “
” or OK button to store the settings. “Stored...” will be displayed on the screen.
English
Install Menu in AV Modes
The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu.
Colour System
Press “
” or “
” button to select Colour System. Use “
” or “
” button to change the colour system to PAL, SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press “
” or “
” button to select Store Program. Press “
” or OK button to store the settings. “Stored...” will be displayed on the screen.
Program Table
Select Program Table by pressing “
” or “
” button.
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the AV modes). By cursor action, programme selection is done automatically.
- 26 -
16.10.2009 10:21:51 |