into correct place automatically. This setting therefore automatically optimizes the display.
Select Autoposition item by using “
” or “
” buttons. Press OK or “
”, “
” button.
Warning: Please ensure auto adjustment is performed with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
Select H Position item by using “
” or “
” button. Use “
” or “
” button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen.
Select V Position item by using “ 
” or “ 
” button. Use “ 
” or “ 
” button to adjust
the value.
Phase
Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
Select Phase item by using “
” or “
” buttons. Use “
” or “
” button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Select Dot Clock item by using “
” or “
” buttons. Use “
” or “
” button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press “
” or “
” button to select the second icon. PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under “Analogue TV Menu System”.
Note: If you set Colour Temp as User, you can define R, G, B settings manually.
Sound, Feature and Source settings are identical to the settings explained in Analog TV menu system.
Displaying TV Information
Programme Number, Programme Name, Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or “INFO/
” button is pressed.
English
Mute Function
Press “
” button to disable sound. Mute indicator will be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the first one is pressing the “
” button and the second one is increasing the volume level.
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
Press the “
/
” button once to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is displayed on the main picture. There are 1 size and 4 positions (upper left, upper right, bottom left and bottom right) available for the PIP window.
When PIP Mode is entered, the default active window is the PIP window and the active window is indicated by a yellow frame around it. The active window can be changed by pressing “
” or “
” button. The status info OSD belongs to active window. The place of the status OSDs are same for both windows.
Press the “
/
” button again to activate PAP mode.
At PAP Mode, two pictures with equal sizes are displayed on the screen. Aspect Ratios of the windows are fixed.
When you switch to PAP Mode, main window in PAP Mode will be displayed on the right side of the screen. The active window can be changed by pressing “
” or “
” button.
Press the “
/
” button again to exit the PAP mode.
Picture Mode Selection
By pressing PRESET button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema.
Freezing Picture
You can freeze the picture on the screen by pressing the “OK” button on the remote control. Press the “OK” button to freeze picture. Press again to quit freeze mode.
Zoom Modes
You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.
- 28 -
16.10.2009 10:21:54 |