
46.ANT. in jack
Connect to an antenna, cable system, or satellite system.
47.Power cord
Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to a standard AC outlet.
48.COAXIAL digital audio out jack
Connect to the digital input of an external amplifier or decoder.
49.AUDIO L/R output jack
Connect to the analog audio input of an external amplifier or decoder.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
Satellite Box or
Cable Box (Not supplied)
OUT
IN
  | |
From Cable  | Coaxial  | 
System  | Cable  | 
  | (Not sup-  | 
  | plied)  | 
 From Cable System or Satellite Dish
or
ANT.  | 1  | 
VHF/UHF Antenna (Not supplied)
 VHF Antenna (Not supplied)
UHF Antenna (Not supplied)
VHF/UHF
Combiner (Not supplied)
ANT.  | ||
or  | ||
Cable (Not  | ||
  | ||
supplied)  | or  | |
  | 
[Fig. 4]
Flat 
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/DVD/VHS without a converter box.
By using this connection you can:
1)Use the TV/DVD/VHS remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the ilustration.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/DVD/VHS Remote Control. Unattended timer recording is limited to one channel at a time.
Antenna/Cable Connections
Continued on the Next Page.
- 11 -  | EN  | 
1C29