Sony TC-TX5 operating instructions Recording a CD, ¹ 2, To stop recording

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tape, since the tape deck automatically detects the tape type.

POWER	»	¹ 2 5
	9 (	p
		6	r
		P	0 )

6 DOLBY NR 4

1 Turn the DHC-MD5 component system on.

The tape deck turns on automatically.

2 Press ¤on the tape deck and place a blank tape.

Pressing ¤again closes the cassette tray.

With the side you want to record on facing upward

9 ( p

6 r

P 0 )

3 Place a CD in the CD player.

4 Set DIRECTION to A to record on one side. Set it to ato record on both sides.

5 Press CD SYNC on the tape deck.

The tape deck stands by for recording and the CD player stands by for playback. The lamps on ¨REC, CD SYNC, á(for upper side) and ¸light up.

6 Press ¸ on the tape deck.

Recording starts.

To stop recording

Press ¹ on the tape deck or on the CD player.

Tips

•If you want to record from the reverse side, press »(for reverse side) so that the lamp on »lights up.

•When you record on both sides, be sure to start from the upper side. If you start from the reverse side, recording stops at the end of the reverse side.

•When you want to reduce the hiss noise in low- level high-frequency signals, set DOLBY NR to ON before step 5.

•If the tape reaches the end of its upper side during dual-sided recording, the fadeout feature works so that a track is not abruptly cut off at the end of the tape (Fade Synchro). The track will record again from the beginning of the reverse side.

The fadeout feature also works when you record on one side only.

Note

You cannot listen to other sources while recording.

7

TC-TX5 3-858-049-11(1).EN