Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm
Antenna
Jack
(_ | _ | 75 ohm Coaxial |
|
| Cable |
Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300 ohm
matching transformer may be necessary.
Antenkna_
300-75 ohm Matching
Transformer
Combination VHF/UHF Antenna (Separate
Antenkna VHF 300 ohm
UHF 300 ohm
Combiner
VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm
the Combiner (not supplied). Connect the VHF 300 ohm
Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF
Connect the VHF 75 ohm cable and UHF 300 ohm
Antenna | VHF 75 ohm |
Combiner
IMPORTANT: Go to page 15 to choose the signal and search for channels.
13