VHF/UHF/CABLE | CHANNELS |
|
|
|
Air |
| Cable |
|
|
VHF |
| VHF |
|
|
|
|
| ||
UHF | STD/HRC/IRC |
| ||
(A) | (W) | |||
| (AA) |
| (WW) | |
| (AAA) | (ZZZ) | ||
| (86) | (94) | ||
| ||||
| (100) | (125) | ||
| 01 | (5A) |
|
|
NOTE:
•If a channel with no broadcast is selected, the sound will automatically be muted.
•It may take a few seconds for a digital channel picture to appear on screen after being selected.
To select the video input source
To view a signal from another device connected to your LCD TV, such as aVCR player, press INPUT SELECT, then press •/v or corresponding Number buttons
CHA/V
Press and release CH AiM. The channel automatically stops at the next channel set into memory.
For proper operation, before selecting channels, they should be set into the memory. See "Memorizing channels" on pages 15 and 16.
DISPLAY
Press DISPLAY to display the current information on the screen.
When the TV receives a digital signal, the digital information will appear.
• | Channel number | • | Channel label (if preset) | ||
• | • | Signal | type | ||
• | Sleep | timer | • | Picture | size |
• | Audio | information | • | Resolution | |
| (Stereo | or SAP) |
|
|
|
Press DISPLAY again to clear the call display.
NOTE:
•After a few seconds, DISPLAY screen will return to normal
QUICK VIEW
This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press QUICK VIEW again to return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound will be silenced and "Mute" will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or
SLEEP
To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP but- ton (Off, Oh 10m, Oh 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds.To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.
81_l, Time,
O. 1Ore
• | Channel | number | • | Station | name |
• Channel | label (if preset) • Broadcast program name | ||||
• | rating | • | Signal | type | |
• | Sleep timer | • | Audio | language | |
• | Program | guide | • | Picture | size |
• | Resolution |
|
|
| |
When the TV receives a analog signal, the analog information will appear.
Labeling channels
Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel,
To create channel labels
1 Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.
2 Press • or • to select"Channel", then press _ or
ENTER.
17