Sansui HDLCDVD220 owner manual Random playback CD, Repeat playback CD, Locating desired scene

4 Press A/v to select "Program View", then press ENTER. Program View shows only the programmed files that you have added in Step 2.

Random playback (CD)

1 In the file browser, press A/v/_l/=,- to select "Mode".

2 Press ENTER to select"Random".

In the Program View, press PLAY. The files start to playback in programmed order that were added by you.

To remove file from program list in stop mode

In the Edit Mode, switch to Program View. Select the files you want to remove, then press ENTER. Select "Clear Program" and press ENTER. Marked file is removed from program list.

NOTE:

•The program is cancelled when you eject the disc or turn the power off.

Repeat playback (CD)

1 In the file browser, press A/v/_l/_,- to select "Repeat".

2 Press ENTER repeatedly to select"Track" or"All".

3 Press PLAY.

The unit automatically starts repeat playback after finishing the current track.

To resume normal playback, select Repeat :"Off" in step 2.

NOTE:

•The repeat or random function is canceled when you eject the disc or turn the power off.

•The track repeat function is canceled when SKIP or _ is pressed.

•In case of Audio CD, the function of A-B Repeat also can be used (See "A-B Repeat playback" on page 30).

3 Press PLAY.

The Random playback will start.

To resume normal playback, select Mode :"Off" in step 2.

Zooming

This unit will allow you to zoom in on the

frame image.You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM magnification O,,1 (x 1.3), 0,,2 (x 1.5) and O_ 3 (x 2.0).

Press A/v/_l/, to view a different part of the frame.

You may move the frame from the center position UR DOWN, LEFT or RIGHT.

3 In the zoom mode press ZOOM repeatedly to return to a 1:1 view (O_ Off).

NOTE:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back,

1 Press JUMP during playback or stop mode.

Chapter---

IJump

Time--:--:--

2 Press • or • to select the "Title", "Chapter" or "Time".

3 Press Number buttons (0-9) to input the number.

•If you input a wrong number, press CANCEL.

•Refer to the package supplied with the disc to check the numbers.