Sony SLV-ED818ME, SLV-ED817TH Disabling unwanted programme positions, If the picture is not clear

Step 6: Presetting channels (continued)

Disabling unwanted programme positions

After presetting channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons.

1 In step 5 on page 15, press programme number button “0” twice to display the number “0” beside CHANNEL SET.

2 Press OK.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.

1 Press PROG +/– to select the programme number for which you cannot obtain a clear picture.

2

3

Press MENU, then select TUNER PRESET and press OK.

Select FINE TUNING.

The fine tuning meter appears.

TUNER PRESET		PROG14
SYSTEM	• B / G D / K I
NORMAL / CATV • NORM			CATV
AUTO PRESET
CHANNEL SET	35
AFT	• ON		OFF
FINE TUNING	– – – –		– – – –

Selected programme position

SET : []

4 Press </, to get a clearer picture, then press OK.

Note that the AFT (Auto Fine Tuning) setting switches to OFF.

Note

•The menu disappears automatically if you do not proceed for more than a few minutes.

16

Getting Started