Sony SLV-ED817TH Specifications, System, Inputs and outputs, General, Supplied accessories

Page 56

Specifications

System

Colour system

PAL, MESECAM, NTSC 3.58, NTSC 4.43 TV system

B/G, D/K, I Channel coverage

B/G: VHF E2 to E12/UHF E21 to E69/ CATV S01 to S05, S1 to S41

D/K: VHF R1 to R12/UHF R21 to R69

I:VHF SA4 to SA13/UHF B21 to B69/ CATV S01 to S05, S1 to S41

RF output signal

UHF channels 21 to 69 (B/G, D/K, I) Aerial out

75-ohm asymmetrical aerial socket

Inputs and outputs

LINE-1 IN and LINE-2 IN (SLV-ED915PS/TH, ED818ME/SG, ED616ME/MJ/SG and ED515PS only)

VIDEO IN, phono jack (1 each)

Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO IN, phono jack (2 each) Input level: 327 mVrms

Input impedance: more than 47 kilohms

LINE OUT

VIDEO OUT, phono jack (1)

Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative

AUDIO OUT, phono jack (2) Standard output: 327 mVrms Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

110 – 240 V AC, 50/60 Hz Power consumption

16 W SLV-ED915PS/TH

14 W SLV-ED818ME/SG, ED817TH, ED815PS,

ED616ME/MJ/SG and ED515PS Operating temperature

5°C to 40°C

Storage temperature –20°C to 60°C

Dimensions

Approx. 430 × 97 × 292 mm (w/h/d) including projecting parts and controls

Mass

Approx. 4.1 kg Power back-up

Built-in self-charging capacitor

Back-up duration:

up to eight hours at a time (SLV-ED915PS/TH, ED817TH, ED815PS and ED515PS only)

up to 24 hours at a time (it may differ in actual performance) (for SLV-ED818ME/SG and ED616ME/MJ/SG only)

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2) Aerial cable (1)

Plug adaptor (1) (included in some models.)

Design and specifications are subject to change without notice.

56

Additional Information

Image 56

Contents Video Cassette Recorder Precautions SafetyInstalling Compatible colour/TV systemsTable of contents Getting Started UnpackingChecking your model name Setting up the remote commander Using the remote commanderInserting the batteries You can use this remoteConnecting the VCR Connecting the aerialAdditional connections To a TV that has audio/video input jacksAudio/video cable not supplied Audio cable not suppliedTuning your TV to the VCR Press ?/1 ON/STANDBY to turn on the VCRPress RF Channel on the VCR This channel will now be referred to as the video channelYou want to play a tape, set the TV to the video channel To obtain a clear picture from the VCRIf your TV system is Select SLV-ED915PS/TH SystemSelecting a Language Before you start…Turn on your TV and set it to the video channel Press M/m to select the desired languagePresetting channels Presetting all receivableChannels using the One Touch Tuning function To check if the channels are preset correctlyTurn on the VCR and the TV Presetting all receivable channels automaticallyPresetting channels Getting Started Prog + Presetting channels manuallyPress /.to move the cursor B to Press Prog +/- to select the programme position Channel coverage System B/G System D/KDisabling unwanted programme positions If the picture is not clearPress /, to get a clearer picture, then press OK Selected programme positionTurn on the VCR and the TV Set the TV to the video channel Setting the clockPress , to select the month and set the month using M/m Setting the clock Press OK to start the clockPlaying a tape Basic OperationsBasic Operations REW StopPlaying a tape Additional tasksTo set the colour system To play an NTSC-recorded tapeTo use the time counter Insert a tape with its safety tab in place Recording TV programmesPress Prog +/- to select the programme position you want to RecordTo stop recording Press x StopTo check the remaining tape length To watch another TV programme while recordingTips Recording TV programmesTo record Ntsc colour system programmes Recording TV programmes using the Easy Timer function Setting the Easy TimerRecording TV programmes using the Easy Timer function REC SpeedSetting or changing the Easy Clock Commander Do this on the VCRTo check or change the timer setting To cancel the timer settingTo use the VCR after setting the timer To stop the VCR while recording, press x StopTips Setting the timer manually You can preset up to eight programmes at a timePress Menu and select Timer SET/ CHECK, then press OK Press M/m to set each itemDaily/weekly recording Setting the timer manuallyPress ?/1 to turn off the VCR Search Operations Tape meter Searching for the current position on a tapeTo stop the Search function Blank section Last recorded Searching using the Blank Search functionTo stop searching Searching using the index function Using the Index Search buttons on the remote commanderUsing the Search Mode button and Easy Timer knob on the VCR Press xSTOP Searching using the Time Search functionEasy Timer knob Press H Play Playing/searching at various speedsTo resume normal playback Setting the recording duration time To cancel the durationTo extend the duration Press zREC repeatedly to set to the new durationChecking Changing/ cancelling timer settings Programme Will be cut off Checking/changing/cancelling timer settingsWhen the timer settings overlap For SLV-ED915PS/TH only Zweiton German stereo system Nicam systemTo select bilingual sound while recording Press Audio Monitor to select the sound you wantRecording stereo and bilingual programmes For SLV-ED818ME/SG, ED817TH and ED815PS onlySelecting the sound during playback How sound is recorded on a video tape Tracking meter Adjusting the pictureAdjusting the tracking About the Adaptive Picture Control APC function APC playbackAPC recording To deactivate the APC functionInitial settings are indicated in bold print Changing menu optionsMenu choices Menu option Set this option toHow to connect to record on this VCR VMC-710/720HG audio/video cable not supplied Signal flowEditing with another VCR EditingEditing with another VCR Jack If the other VCR is Use a cable such asWhen recording on this VCR Basic editingBefore you start editing To stop editingAudio dubbing SLV-ED818ME/SG and ED616ME/MJ/ SG only To stop while editingAdditional Information TroubleshootingClock Power Playback Symptom Remedy Others TroubleshootingSymptom Remedy Head Condition Sensor Sapphire tape cleanerSymptoms caused by contaminated video heads Specifications Supplied accessoriesSystem Inputs and outputsRefer to the pages indicated in parentheses for details Index to parts and controlsFront panel Display window Index to parts and controlsVideo jacks Mains lead Aerial OUT connector LINE-1 in AUDIO/VIDEO jacksRear panel for SLV-ED616ME/MJ/SG and ED515PS only Remote commander Index V, W, X, Y