Sony SLV-ED515PS Editing with another VCR, Jack If the other VCR is Use a cable such as

Page 50

Editing with another VCR (continued)

How to connect to a stereo system (SLV-ED915PS/TH, ED818ME/SG, ED817TH and ED815PS only)

Connect LINE-1 IN AUDIO or LINE-2 IN AUDIO (SLV-ED915PS/TH and ED818ME/SG only) on this VCR to the audio output jacks on the stereo system, using the RK-C510HG audio cable (not supplied).

Tips

SLV-ED915PS/TH, ED818ME/SG, ED817TH and ED815PS

•If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left channels. When connecting to the AUDIO R (red) jack, the sound is recorded only on the right channel.

•You can also use the LINE-1 IN jack instead. If the other VCR is a monaural type, the sound is recorded only on the channel whose jack is connected to the audio plug. To record on both right and left channels, connect the audio plugs to the AUDIO R/L jacks using a VMC-910HG audio/video cable (not supplied).

SLV-ED616ME/MJ/SG and ED515PS

• Use the following audio/video cable according to the type of the other VCR.

Jack	If the other VCR is:		Use a cable such as:

LINE-1 IN	Stereo type		VMC-910HG (3-phono to 2-phono)

	Monaural type		VMC-710HG/720HG (2-phono to 2-phono)

LINE-2 IN	Stereo type		VMC-810HG (3-phono to 3-phono)

	Monaural type		VMC-910HG (3-phono to 2-phono)

Notes

•Make sure you connect the plugs to the jacks of the same colour.

•If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.

50

Editing

Image 50

Contents Video Cassette Recorder Installing PrecautionsSafety Compatible colour/TV systemsTable of contents Getting Started UnpackingChecking your model name Inserting the batteries Setting up the remote commanderUsing the remote commander You can use this remoteConnecting the VCR Connecting the aerialAudio/video cable not supplied Additional connectionsTo a TV that has audio/video input jacks Audio cable not suppliedPress RF Channel on the VCR Tuning your TV to the VCRPress ?/1 ON/STANDBY to turn on the VCR This channel will now be referred to as the video channelIf your TV system is Select You want to play a tape, set the TV to the video channelTo obtain a clear picture from the VCR SLV-ED915PS/TH SystemTurn on your TV and set it to the video channel Selecting a LanguageBefore you start… Press M/m to select the desired languageChannels using the One Touch Tuning function Presetting channelsPresetting all receivable To check if the channels are preset correctlyTurn on the VCR and the TV Presetting all receivable channels automaticallyPresetting channels Getting Started Prog + Presetting channels manuallyPress /.to move the cursor B to Press Prog +/- to select the programme position Channel coverage System B/G System D/KPress /, to get a clearer picture, then press OK Disabling unwanted programme positionsIf the picture is not clear Selected programme positionTurn on the VCR and the TV Set the TV to the video channel Setting the clockPress , to select the month and set the month using M/m Setting the clock Press OK to start the clockBasic Operations Playing a tapeBasic Operations REW StopTo set the colour system Playing a tapeAdditional tasks To play an NTSC-recorded tapeTo use the time counter Press Prog +/- to select the programme position you want to Insert a tape with its safety tab in placeRecording TV programmes RecordTo check the remaining tape length To stop recordingPress x Stop To watch another TV programme while recordingTips Recording TV programmesTo record Ntsc colour system programmes Recording TV programmes using the Easy Timer function Setting the Easy TimerRecording TV programmes using the Easy Timer function REC SpeedSetting or changing the Easy Clock Commander Do this on the VCRTo use the VCR after setting the timer To check or change the timer settingTo cancel the timer setting To stop the VCR while recording, press x StopTips Press Menu and select Timer SET/ CHECK, then press OK Setting the timer manuallyYou can preset up to eight programmes at a time Press M/m to set each itemDaily/weekly recording Setting the timer manuallyPress ?/1 to turn off the VCR Search Operations Tape meter Searching for the current position on a tapeTo stop the Search function Blank section Last recorded Searching using the Blank Search functionTo stop searching Searching using the index function Using the Index Search buttons on the remote commanderUsing the Search Mode button and Easy Timer knob on the VCR Press xSTOP Searching using the Time Search functionEasy Timer knob Press H Play Playing/searching at various speedsTo resume normal playback To extend the duration Setting the recording duration timeTo cancel the duration Press zREC repeatedly to set to the new durationChecking Changing/ cancelling timer settings Programme Will be cut off Checking/changing/cancelling timer settingsWhen the timer settings overlap To select bilingual sound while recording For SLV-ED915PS/TH only Zweiton German stereo systemNicam system Press Audio Monitor to select the sound you wantRecording stereo and bilingual programmes For SLV-ED818ME/SG, ED817TH and ED815PS onlySelecting the sound during playback How sound is recorded on a video tape Tracking meter Adjusting the pictureAdjusting the tracking APC recording About the Adaptive Picture Control APC functionAPC playback To deactivate the APC functionMenu choices Initial settings are indicated in bold printChanging menu options Menu option Set this option toEditing with another VCR How to connect to record on this VCRVMC-710/720HG audio/video cable not supplied Signal flow EditingEditing with another VCR Jack If the other VCR is Use a cable such asBefore you start editing When recording on this VCRBasic editing To stop editingAudio dubbing SLV-ED818ME/SG and ED616ME/MJ/ SG only To stop while editingAdditional Information TroubleshootingClock Power Playback Symptom Remedy Others TroubleshootingSymptom Remedy Head Condition Sensor Sapphire tape cleanerSymptoms caused by contaminated video heads System SpecificationsSupplied accessories Inputs and outputsRefer to the pages indicated in parentheses for details Index to parts and controlsFront panel Display window Index to parts and controlsVideo jacks Mains lead Aerial OUT connector LINE-1 in AUDIO/VIDEO jacksRear panel for SLV-ED616ME/MJ/SG and ED515PS only Remote commander Index V, W, X, Y