Sony SLV-685HF Quick reference to using the VCR, To play a tape, To record a program, To watch TV

Page 70

Quick reference to using the VCR

Hookup 1

To play a tape

1Set the TV to channel 3 or 4 (or to video input, if you made A/V connections.)

2Insert a tape and press PLAY.

To record a program

1Turn on the cable box.

2Press VCR Plus+ on the remote commander.

3Enter the program’s PlusCode number.

4Select ONCE, DAILY, or WEEKLY, then press SET.

5Insert a tape.

6Press POWER to turn off the VCR.

7Leave the cable box on.

To watch TV

1Turn off your VCR, or press the VCR’s TV/VTR button until the VTR indicator in the display window goes off.

2Turn on your cable box.

3Set the TV to the cable box output channel (usually 2, 3, or 4).

4Set the cable box to the channel you want to watch.

Hookup 2

To play a tape

1If you made A/V connections, set the TV to video input.

If you didn’t use A/V hookup:

•Turn on the cable box.

•Set the cable box to channel 3 or 4.

•Set the TV to the output channel of the cable box (usually 2, 3 or 4).

2Insert a tape and press PLAY.

To record a program

1Press VCR Plus+ on the remote commander.

2Enter the program’s PlusCode number.

3Select ONCE, DAILY, or WEEKLY, then press SET.

4Insert a tape.

5Press POWER to turn off the VCR.

To watch TV

1Turn off your VCR, or press the VCR’s TV/VTR button until the VTR indicator in the display window goes off.

2Select the channel with your cable box (if you have one) or with your TV.

Hookup 3

To play a tape

1Set the TV to channel 3 or 4 (or to video input, if you made A/V connections.)

2Insert a tape and press PLAY. If there’s no picture on your TV, press the VCR’s TV/VTR button until the VTR indicator comes on in the display window.

To record a program

1Press VCR Plus+ on the remote commander.

2Enter the program’s PlusCode number.

3Select ONCE, DAILY, or WEEKLY, then press SET.

4Insert a tape.

5Press POWER to turn off the VCR.

To watch TV

1Turn off the VCR, or press the VCR’s TV/VTR button until the VTR indicator in the display window goes off.

2Set the TV to the channel you want to watch.

Hookup 4

To play a tape

1Set the TV to channel 3 or 4 (or to video input, if you made A/V connections.)

2Insert a tape and press PLAY.

To record a program

1Turn on the cable box.

2Set the cable box to the channel you want to record.

3Press VCR Plus+ on the remote commander.

4Enter the program’s PlusCode number.

5Select ONCE, DAILY, or WEEKLY, then press SET.

6Insert a tape.

7Press POWER to turn off the VCR.

8Leave the cable box on.

To watch TV

1Turn off your VCR, or press the VCR’s TV/VTR button until the VTR indicator in the display window goes off.

2Turn on your cable box.

3Set the TV to the cable box output channel (usually 2, 3, or 4).

4Set the cable box to the channel you want to watch.

If you have any questions about this product, you may call: Sony Customer Information Center

1-800-222-SONY (7669) or write to: Sony Customer Information Center Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656

Sony Corporation Printed in Malaysia

SONY SLV-685HF (E) 3-859-040-11 (1)

Page 69 Page 71
Image 70
Page 69 Page 71
Contents Video Cassette Recorder Owner’s recordInstalling PrecautionsSafety InformationTable of contents Unpacking Getting StartedInserting the batteries Setting up the remote commanderUsing the remote commander You can use this remoteCode numbers of controllable TVs Controlling other TVs with the remote commanderManufacturer Code Number Selecting the best hookup option HookupsBefore you get started Strereo receiver Use this hookup if your TV has stereo jacksUse this hookup if your TV doesn’t have stereo jacks Audio/video cable suppliedGetting Started What you can do with this hookup Using cable box controlRecommended use What you can’t doCH 3 or CH 4, whichever Set the RF Unit switch toCursor Channels Hookup 1 VCR Plus+ channel setupProgram guide channel Your actual TV channel You dont have a Cable box For connectorRecord scrambled channels that require a cable box UHF connectionHookup 2 VCR setup Normal displayHookup 2 VCR Plus+ channel setup TV A, B, or C Use this hookup if you’re usingAntenna hookup Match the typeHookup 3 VCR setup Hookup 3 VCR Plus+ channel setup Incompatible cable box with many scrambled channels Wall Cable boxHookup 4 VCR setup Hookup 4 VCR Plus+ channel setup Program guide channel Cable box output channelNo UHF DSS Digital Satellite System receiver∙ Record programs with VCR Plus+ DSS receiver Side viewHookup 5 VCR setup Wall Splitter Switch Cable box For connector types B and C, no UHF connection is requiredHookup 6 VCR setup Tuner Preset CH3 Hookup 6 VCR Plus+ channel setup Press Cursor /.to select ENGLISH, ESPAÑOL, or Français Selecting a languageYou can change the on-screen display language Then press ExecuteSetting the clock Before you start…Press Cursor ?//to select ON, then Setting up cable box controlSkip this section if you are using Hookup 2, 3, 4 or Press CursorCable box/DSS receiver code number, then Number from the chart belowPress the number buttons to enter Find your cable box/DSS receiver codeSetting up cable box control DSS receiver Code numbers BrandSignal flow To check the cable box control settingTo ensure correct operation Setting up cable box control Turn on the VCR and the TV Presetting channelsPresetting all receivable channels automatically Press Cursor /.to select ANTENNA/CABLEPresetting channels Channel to be disabled Presetting/disabling channels manuallyChannel to be preset CH +If the picture is not clear Example of Channel Line-up Chart Setting up VCR Plus+How to set up your VCR How VCR Plus+ worksSetting up VCR Plus+ Repeat steps 2 and 3 for each channel When you’ve finished, press Menu to exitWhose numbers don’t match Basic Operations Playing a tapeTurn on your TV and set it to the video channel StopTo use the time counter Additional tasksTo skip playback Basic OperationsTo record from a cable box, turn it on Insert a tape with its safety tab in placeRecording TV programs RECTo check the remaining time BasicTo stop recording OperationsTo watch another TV program while recording Safety tab TipsTo save a recording Press VCR Plus+ Recording TV programs using VCR Plus+Number buttons To enter another setting, repeat steps 1 to Using Cursor ?//, then press SETTimer Clear to cancel the setting Press Tape Speed to select SP or EPTo lock the VCR after setting the timer Child Lock To use the VCR after setting the timerTip Setting the timer manually Press Menu and select Timer SET/ CHECK, then press ExecuteNumber and tape speed Setting, move the cursor to the next line and repeat stepSet the date, start and stop times, channel Press ExecuteTo resume normal playback Playing/searching At various speedsPress áPLAY Press Quick Timer repeatedly to set to the new duration Recording TV programs using the quick timerUsing the quick timer during stop mode To extend the durationWhen the timer settings overlap Checking Changing Canceling timerSettings Turn on your TV and set it toRecording bilingual programs Recording stereo and bilingual programsRecording stereo programs Selecting the sound while playingHow sound is recorded on a video tape About Adaptive Picture Control APC Adjusting the pictureAdjusting the tracking APC playbackPress Menu and select Advanced Options Initial settings are indicated in bold printChanging menu options Menu choicesVMC-810 audio/video cable not supplied Signal flow How to hook up to record on this VCRHow to hook up to a stereo system Editing with another VCRTo stop editing Operation When recording on this VCRBefore you start editing Press the p Stop buttons on both VCRsSetting the RF unit General setup informationAdditional Information Ohm twin lead cable EAC-32 Antenna connector not supplied Attaching the external antenna connectorAttaching a UHF/VHF band mixer Troubleshooting Symptoms caused by contaminated video headsSymptom Remedy OthersSpecifications Front panel Index to parts and controlsRefer to the pages indicated in parentheses for details Display window Rear panelRemote commander J, K IndexX, Y, Z To record a program Quick reference to using the VCRTo play a tape To watch TVSony SLV-685HF E 3-859-040-11
Top Page Image Contents