Burn Firmware, Windows OS CD Writing Program

3 Burn Firmware

Use one of the below procedures to burn firmware to a CD-R disc.

1)Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer.

2)If the below (or similar) screen appears (Windows XP), left click on CANCEL.

3)Right click on the PANA_DVD.FRM file on the DESKTOP, mouse over SEND TO, and then left click on the CD BURNER DRIVE.

4) If the below screen appears, left click on YES.

NOTE: The below screen may appear momentarily.

Page 4 of 8