Panasonic DMR-EZ47 installation instructions Firmware History, Applicable Models, Purpose

Page 2

1 Firmware History

1.1Applicable Models

DMR-EZ47, DMR-EZ475

Includes models with suffix K, S, V, VK, VP, or VS

1.2Purpose

UJ-225

Improved playback DVD+R media which was recorded by SONY DVD Recorder.

Optimization of track jump control for CD-RW.

Improvement of recording quality for DVD-R DL.

UJ-217

Enhances Closed Captioning display.

Enables the unit to the download the New V-Chip/Regional Rating Table (RRT).

UJ-205

Modification to improve VHS Timer Recording.

UJ-201

ATSC level meter indication improvement with weak signal.

Stops disc rotation when the [EJECT] button is pressed.

UJ-196

Countermeasure for occurred aging mode by remote control signal.

Protection against Drive unit fuse blowing due to customer Disc condition.

Improved HDMI function. (Depends on TV)

Upgrade program for next generation drive.

UJ-190

When recording program of 5.1 channel audio, the center channel audio is not output.

The title information of the recorded program is not displayed correctly.

UJ-184

Hang-up sometimes occurs using JPEG of RAM disc on "Direct Navigator".

"Copying has been stopped" message is displayed on the "Status" screen.

"oooooo" is indicated continuously on power off after malfunction occurs.

DVD-Video is played back on indication of "oooooo" after power off using EZ-Sync.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 2 of 8

Image 2
Contents DMR-EZ47 DVD Recorder Firmware Installation Instructions Purpose Firmware HistoryApplicable Models Download Firmware PANADVD.FRMBurn Firmware Windows OS CD Writing ProgramSystem Tray Other OS CD Writing Program 3rd Party CD Burning SoftwareDragging & Dropping Install Firmware DMR-EZ47 DVD Recorder Firmware Installation Instructions