Panasonic DMR-EX78 quick start To cancel recording when recording has already begun

Press [PROG/CHECK].

To cancel recording when recording has already begun

1 While the unit is on

Press [DRIVE SELECT] to select the recording drive and press [∫].

Stop Recording

Timer recording in progress.

Stop this timer recording?

It will be cancelled if you stop.

Stop Recording Cancel

SELECT

OK RETURN

2 Press [2, 1] to select “Stop

Recording” and press [OK].

If you stop a timer recording, it will be cancelled. However, if you have set a weekly or daily timer recording, the recording will start from the next time the timer recording is set.

To release the unit from recording standby

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

1

2 Press [3, 4] to select the programme and press the “Red” button.

≥The timer icon “F” (➡ right) disappears from the timer recording list.

≥You cannot cancel timer recording standby mode as long as even one timer icon “F” (➡ right) remains in the timer recording list.

≥Press the “Red” button again to activate timer recording standby.

Notes on timer recording

≥Timer recordings are activated regardless of whether the unit is turned on/off.

≥Timer recordings begin when the set time is reached even when playing.

≥Timer recordings do not begin while editing or copying in normal speed mode (➡ 45).

≥If the unit is turned on when timer recording begins, it remains turned on after recording finishes. It does not turn off automatically.

You can turn the unit off during timer recording.

≥If the unit is not put in the timer recording standby mode at the last

10 minutes before the programmed timer recording starting time, the “F” flashes on the unit’s display.

≥When you programme successive timer recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programmes.

Programme	Programme
	Not recorded
Recorded	Recorded

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Timer		Remain	HDD	30:24 SP		DVD 1:58 SP
Recording						TUE 14.10.08. 12:54:00
No.	Name	Date	Start	Stop	HDD		Mode	Drive
					DVD			space
		New Timer Programme
Press OK to store new programme.
	OK
	RETURN

AIcons

FTimer recording standby is activated. [ This programme is currently recording.

Programmes are overlapped. Recording of the programme with the later start time starts when the earlier programme finishes recording.

l	You stopped a weekly or daily timer recording. The icon
	disappears the next time the timer programme starts
	recording.

The disc was full so the programme failed to record.

The programme was copy-protected so it was not recorded.

XThe programme did not complete recording because the disc is dirty or some other reason.

Timer programmes set to Auto Renewal Recording (➡ 26).

Titles that have been rerouted to the HDD (Displayed while recording.)

HDD Recording drive is set to HDD DVD Recording drive is set to DVD

BMessage displayed in the “Drive space” line

OK: Displayed if the recording can fit in the remaining space.

>(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present time) based on the time remaining on the disc.

!: It may not be possible to record because: ≥there is not enough space left.

≥the number of possible titles has reached its maximum.

Relief: Timer programmes that will be relief recorded to the HDD.

CChannel name, programme name and other information are displayed.

∫To change a programme

Press [3, 4] to select the programme and press [OK]. (➡ 24, right column, step 3)

∫To delete a programme

Press [3, 4] to select the programme and press [DELETE ¢].

You can also delete a programme with the following steps

1Press [3, 4] to select the programme and press [OPTION].

2Press [3, 4] to select “Delete” and press [OK].

∫To exit the timer recording list

Press [PROG/CHECK].

[Note]

≥Programmes that failed to record are deleted from the timer

recording list at 4 a.m. two days later.

Advanced timer recording

RQT9088

25