Panasonic DMR-EX78 quick start Others

Others

(All factory default settings are indicated with underlined text.)

Remote Control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

[DVD 1] [DVD 2] [DVD 3]

Use “DVD 1”, the factory set code, under normal circumstances.

1Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”) and press [OK].

Setup	Remote Control
	Press “ ” and “OK” together
	for more than 5 seconds on the remote
Tuning
	control.

Disc

Picture

To change the code on the remote control

2While pressing [OK], press and hold the numbered button ([1], [2] or [3]) for more than 5 seconds.

3Press [OK].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (➡ step 2).

[Note]

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1 (➡ step 2).

Clock

This unit usually obtains time and date information from digital broadcasts and automatically corrects the time several times a day. However, if the time is not set correctly use the settings listed in the method below.

≥In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.

		Clock		e.g.,
Automatic			Region Selection	This screen appears while
	Off		Queensland	receiving a digital broadcast.

TimeDate

15 : 45 : 39 11 . 12 . 2008

CHANGE	Please set the clock.
SELECT	OK: access RETURN: leave
OK
RETURN

1Press [3, 4] to select “Off” of “Automatic” and press [OK].

2 Press [2, 1] to select the item you want to change.

The items change as follows:

Hour!#Minute!#Second!#Day!#Month!#Year

^-----------------------------------------------------------------------------------------	J
Reset the clock regularly to maintain accuracy.
(Monthly accuracy +/– 15 seconds.)

3Press [3, 4] to change the setting.

You can also use the numbered buttons for setting.

4Press [OK] when you have finished the settings. The clock starts.

[Note]

If a TV station transmits a time setting signal, and when “Automatic” in the Clock setting menu is set to “On”, the automatic time correction function checks the time and if necessary it is adjusted several times every day.

∫To change the region

1Press [3, 4] to set “Automatic” to “On” and press [OK] in step

1.

2Press [3, 4] to select the correct region and press [OK]. Auto clock setting starts. This takes a few minutes. “Automatic clock setting completed.” screen is displayed.

3Press [RETURN] to exit the screen.

Power Save

[On]	Power consumption is minimized when the unit is turned to
	standby (➡ 83).
[Off]		settings
(If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.)
≥Refer to the following when “Power Save” is set to “On”.
– “FL Display” is automatically set to “Automatic” (➡ 63).
– The “Quick Start” function does not work. (It is automatically		unit’s
Quick Start
turned to “Off”.)
1 Sec. Quick Start for Recording & EPG Display		the
(When connecting to TV using 21-pin Scart, COMPONENT
VIDEO, VIDEO or S VIDEO terminals)		Changing
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. If the GUIDE
button is pressed while the unit is off, the Electronic Program
Guide (EPG) displays in less than 1 second. (Quick Start Mode)
[On]
[Off]	Standby power consumption is less than when this is set to
	“On”.

(If this is set to “On”, “Power Save” is automatically turned to “Off”.) ≥Startup takes up to a minute when:

–You play a disc or start recording to discs other than DVD-RAM.

–You want to make other operations.

–The clock has not been set.

≥Depending on the type of TV or the connected terminal, it may take time to display the screen.

DivX Registration

You need this registration code to purchase and play DivX Video- on-Demand (VOD) content (➡ 31).

RQT9088

65