Panasonic Comprehensive Guide for HDD Recorder Troubleshooting and DMR EX78 Settings

Changing the unit’s settings

System Update

In order to update this unit’s software, the TV Guide download, and to support system changes made by broadcasts, this unit periodically performs software updates.

Press [OK] to show the following settings.

≥Update data and TV Guide download information is sent by an unscheduled digital broadcast. In order to receive these updates, you must be able to receive digital broadcasts.

≥An update will take approximately 60 minutes. While the update is in progress, “SW-DL” appears on the unit’s display. You cannot operate the unit until the update is complete. Removing the AC mains lead while the update is in progress may damage the unit.

≥TV Guide download will take approximately 60 minutes. While the TV Guide download is in progress, “GUIDE” appears on the unit’s display. The TV Guide download can be interrupted by switching on the unit.

TV Guide Download in Standby

[On]	When you set this unit to standby mode, TV Guide data
	is downloaded automatically.
[Off]

Software Update in Standby

[On]	When you set this unit to standby mode, software
	updates are downloaded automatically.
[Off]

TV Guide/Software search period

Selects the time to automatically perform TV Guide download and updates when the unit is set to standby mode. This can only be set when “TV Guide Download in Standby” and “Software Update in Standby” is set to “On”.

≥If there is a programmed recording set for the time you have selected, the programmed recording will be given priority.

[Automatic]	The unit will give priority to searching for TV
	Guide download and update data at midnight.
[02:00–06:00]	[06:00–10:00]	[10:00–14:00]
[14:00–18:00]	[18:00–22:00]	[22:00–02:00]

Software Update Search Now

Start the search for new software manually.

A new software version is announced by a message. Do not turn your unit off during the update. This could result in the loss of data. A message shows that the update has finished.

If a new software version is not going to be broadcast for the next few days, a corresponding message also appears.

≥If applicable update data is found, press [2, 1] to select “Yes” and press [OK].

Initialize

≥Press [OK] to show the following settings.

Shipping Condition

All the settings except for the ratings level, ratings password and clock settings return to the factory preset. The timer recording programmes are also cancelled.

[Yes] [No]

Default Settings

All the settings other than the tuning settings, clock settings, region settings, disc language settings, ratings level, ratings password, remote control code, return to the factory presets.

	[Yes]	[No]
List of TV Reception Channels
	Tuner	Channel	VHF	UHF	CATV
	System	Coverage
	PAL–B	Australia	0–12	28–69	45 MHz to
		Analogue			470 MHz
	DVB–T	Australia	6–12	27–69	–
		Digital

RQT9088

66