Panasonic DMR-EX78 quick start Register still pictures for copy, Press 2, 1 to select Yes

6 Register still pictures for copy.

≥If you are going to copy a registered list without making any changes to it (➡ step 7).

You can register still pictures or still picture folders.

≥Still pictures and folders cannot be registered on the same list.

Copy
Cancel All	Destination Capacity: 4343MB
	Picture/Folder		Picture
1 Copy Direction
	No.	Size	Name of item
SD CARD ￿￿HDD		New item (Total=0)
2 Copy Mode
PICTURE High Speed
3 Create List
		Page 01/01
Start Copying		Create copy list.
OK
OPTION
RETURN

∫To register individual still pictures

1Press [3, 4] to select “Create List” and press [1].

2 Press [3, 4] to select “New item” and press [OK].

3 Press [3, 4, 2, 1] to select the still picture and press [;].

A check mark is displayed. Repeat this step until you select

all necessary items.

≥Press [;] again to cancel.

≥The items will be copied in the order of the copying list. If you want to specify the order, repeat selecting one item at a time.

≥To show other pages (➡ right) ≥To select another folder (➡ right)

4Press [OK].

≥To edit the copying list (➡ right)

5Press [2] to confirm.

∫To register on a folder by folder basis

1Press [3, 4] to select “Create List” and press [1].

2 Press [3, 4] to select “Picture/Folder” and press [OK].

Copy
Cancel All	Destination Capacity: 4343MB
	Picture/Folder		Picture
1 Copy Direction
	No.	Size	Name of item
SD CARD ￿￿HDD		New item (Total=0)
2 Copy Mode

3Press [3, 4] to select “Folder” and press [OK].

4 Press [3, 4] to select “New item” and press [OK].

5 Press [3, 4] to select the folder and press [;].

A check mark is displayed. Repeat this step until you select

all necessary items.

≥Press [;] again to cancel.

≥The items will be copied in the order of the copying list. If you want to specify the order, repeat selecting one item at a time.

≥To show other pages (➡ right)

6Press [OK].

≥To edit the copying list (➡ right)

7Press [2] to confirm.

7 Press [3, 4] to select “Start

Copying” and press [OK].

≥Only when copying individual still pictures from [HDD] [RAM] to [SD]

When specifying another folder as the copying destination, select “Folder”.

Folder	New folder
	001	100__DVD
	002	101__DVD
	003	102__DVD
	--- New folder
	---
8 Press [2, 1] to select “Yes” and
press [OK] to start copying.

To stop copying

Press and hold [RETURN] for 3 seconds.

To return to the previous screen

Press [RETURN].

[Note]

≥The sequence in which the still pictures are registered on the copy

list may not be the same at the copy destination.

≥If still pictures are already contained inside the copy destination folder, the new still pictures are recorded following the existing still

pictures.

≥If the space on the destination drive runs out or the number of files/ folders to be copied exceeds the maximum (➡ 13), copying will

stop partway through.

≥You cannot copy the information about the picture rotation.

To show other pages

Press [3, 4, 2, 1] to select “Previous” or “Next” and press

[OK].

≥You can also press [, ] to show other pages.

∫To edit the copying list

Select the item in step 6–4(for a still picture) or 6–6
	Delete All
(for a folder) (➡ left)
1 Press [OPTION].
	Add
2 Press [3, 4] to select the operation and press
	Delete
[OK].
Delete All:
Delete all items registered on the copying list.
Press [2, 1] to select “Yes” and press [OK].

Add:

Add new items to the copying list.

1Press [3, 4, 2, 1] to select the still picture or folder and press [;].

A check mark is displayed. Repeat this step until you select all

necessary items.

≥Press [;] again to cancel.

2Press [OK].

Delete:

Delete the selected items.

Press [2, 1] to select “Yes” and press [OK].

To cancel all registered copying settings and lists

After performing steps 1–3 (➡ 50, Copying using the copying list)

1Press [3, 4] to select “Cancel All” and press [OK].

2Press [2, 1] to select “Yes” and press [OK].

≥The settings and lists may be cancelled in the following situations.

–When a title or still picture has been recorded or deleted at the copy source

–When steps have been taken, for instance, to turn off the unit, remove the card, open the tray, change the copy direction, etc.

∫To select another folder

After performing steps 6–2(➡ left, To register individual still pictures)

1Press [3, 4, 2, 1] to select “Folder” and press [OK].

2 Press [3, 4] to select the folder and press [OK].

Create List		Picture (JPEG)		Create List	Folder
SD CARD				SD CARD
Folder	103__DVD				\DCIM\100__DVD
0001	0002	0003	0004
					001 100__DVD
					002 101__DVD
					003 102__DVD
----	----	----	----		004 103__DVD
					---
					---
----	----	----	----		---
					---
					Page 01/01
Previous		Page 001/001	Next		Picture	0012	File	0012
OK				OK
RETURN				RETURN

You can also select folders with the numbered buttons. e.g.,

5:[0] ➡ [0] ➡ [5]

15:[0] ➡ [1] ➡ [5]

115:[1] ➡ [1] ➡ [5]

≥The still pictures of different folders cannot be registered on the same list.

Copying still pictures

RQT9088

51