Panasonic DMR-EH575 On-Screen Messages, Grey Background, FL Display, TV Aspect, Progressive

Tabs	Menus		Options (Underlined items are the factory presets.)
Display	Language		≥English	≥Deutsch	≥Français	≥Italiano
	Choose the language for these menus and on-screen messages. ≥Español			≥Nederlands
	On-Screen Messages		≥Automatic
	Choose whether to show status messages automatically.		≥Off
	Grey Background		≥On
	Select “Off” if you do not want to have the unit show the grey		≥Off
	background when tuner reception is weak.
	FL Display		≥Bright	≥Dim
	Changes the brightness of the unit’s display.		≥Automatic: The display turns dark during play and disappears
	This setting is fixed with “Automatic” if you set “Power Save”			when the unit is turned off. It reappears momentarily
	(➡ 66) to “On”.			if a button is pressed. While using this mode, the
				standby power consumption can be reduced.
Connection	TV Aspect (➡ 20)	Set to match the type of ≥16:9
		television connected.	≥Pan & Scan
			≥Letterbox
	Progressive (➡ 24)		≥On	≥Off
	This setting is fixed with “Off” if you set
	“AV1 Output” to “RGB 1 (without
	component)” or “RGB 2 (without
	component)”.
	TV System (➡ 68)		≥PAL	≥NTSC
	HDMI Settings
	≥Press [OK] to show the following settings.

Changing the unit’s settings

HDMI Video Format

You can only select items compatible with the connected equipment. This setting normally does not need to be changed. However if you are concerned about output picture quality, it may be improved by changing the setting.

Still pictures play at a resolution equivalent to 480p regardless of the settings.

≥576i/480i ≥576p/480p ≥720p ≥1080i

≥1080p: When setting video output to “1080p”, we recommend using a Panasonic HDMI cable 5 meters or less in length to prevent video distortion.

≥Automatic: Automatically selects the output resolution best suited to the connected television (1080p, 1080i, 720p, 576p/480p or 576i/480i).

Aspect for 4:3 Video	≥4:3:	Picture output expands left or right.
To play a 4:3 title when connected with an HDMI cable, set
how to show images on the TV screen.	≥16:9:	Picture is output as original aspect with
		side panels.

	Digital Audio Output	≥HDMI and Optical
		≥Optical Only: Select when this unit is connected to an amplifier
		with an optical digital audio cable and connected
		to a TV with an HDMI cable and you want to enjoy
		the highest quality of audio from discs (➡ 16).
	VIERA Link	≥On
	Set to use “HDAVI Control” function when connected with an	≥Off: Select when you do not want to use “HDAVI Control”.
	HDMI cable to a device that supports “HDAVI Control”.
AV1 Output		≥Video (with component):
Selects the output from the AV1 terminal.		Select when a TV is connected that can receive a composite
Select “RGB 1 (without component)” or “RGB 2 (without		signal.
component)” for RGB output.		≥S Video (with component):
Select “Video (with component)” or “S Video (with component)”		Select when a TV is connected that can receive an S Video
for component output (progressive output).		signal.
Set according to the signal and terminal of the connected TV.		≥RGB 1 (without component):
When a decoder is connected, do not set to “RGB 1 (without		Select when a TV is connected that can receive an RGB signal.
component)”.		If you always would like to view the picture from the unit in RGB
		signal, select this mode. The TV screen will automatically switch
≥If this unit is connected with an HDMI cable, you cannot select		to display the picture from the unit when the unit is turned on.

“RGB 1 (without component)” or “RGB 2 (without component)”. ≥RGB 2 (without component):

Select when a TV is connected that can receive an RGB signal. If you would like to switch to display the picture from the unit only when playback or viewing menus, select this mode.

(continued on the next page)

RQT8881

65