TV screen and video (continued) |
| Page |
Titles recorded with 16:9 aspect | ≥16:9 aspect programmes are recorded in 4:3 aspect in the following cases. |
|
are stretched vertically. | — | |
| recording mode. | — |
| ||
| 63 | |
| When you want to record 16:9 programme in the same aspect, set “Rec for High Speed | |
| Copy” to “On”, and set the “Aspect for Recording” to “16:9”. | 63 |
| ||
| made using the wrong aspect. Match the aspect settings to the broadcast when recording. |
|
| It may be possible to adjust the display mode on the TV. Refer to your television’s operating |
|
| instructions. |
|
There is a lot of | ≥Set “Playback NR” in the Picture menu to “Off”. | 45 |
playing video. |
|
|
|
|
|
When playing | ≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method or | 45 |
progressive output, one part of | material used on |
|
the picture momentarily appears |
|
|
to be doubled up. |
|
|
There is no apparent change in | ≥The effect is less perceivable with some types of video. | — |
picture quality when adjusted |
|
|
with the Picture menu in the on- |
|
|
screen menus. |
|
|
|
|
|
The images from this unit do not | ≥Make sure that the television is connected to the AV1 terminal, VIDEO OUT terminal, | |
appear on the television. | S VIDEO OUT terminal, COMPONENT VIDEO OUT terminals or HDMI terminal on this unit. | — |
| ≥Make sure that the television’s input setting (e.g., AV 1) is correct. | |
Picture is distorted. | ≥Progressive output is set to on but the connected television is not progressive compatible. | — |
Press and hold [∫] and [1] (PLAY) on the main unit at the same time for more than 5 seconds |
| |
|
| |
| to cancel this setting. The setting will change to interlace. | 68 |
| ≥The unit’s “TV System” setting differs from the TV system used by the disc now playing. While | |
| stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more seconds. |
|
| The system switches from PAL to NTSC or vice versa. | — |
| ≥When this unit is connected with an HDMI cable, use a disc that matches with this unit’s TV | |
| system. | — |
| ≥Picture may not be seen when more than 4 devices are connected with HDMI cables. | |
| Reduce the number of connected devices. |
|
The picture is distorted during | ≥You may be playing a TV programme recorded with poor reception or unfavorable weather | — |
play, or video will not play | conditions. | — |
correctly. | ≥The picture may be distorted or a black screen may appear briefly between recorded titles in | |
| the following situations: |
|
|
| |
|
| |
|
| |
|
| |
|
|
|
Sound |
|
|
Troubleshooting guide
No sound. Low volume. Distorted sound.
Cannot hear the desired audio type.
Cannot switch audio.
≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the amplifier if you have connected one.
≥Press [AUDIO] to select the audio. ≥Turn off V.S.S. in the following cases.
≥Audio may not be output due to how files were created. (DivX)
≥Audio may not be heard when more than 4 devices are connected with HDMI cables. Reduce the number of connected devices.
≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal or the OPTICAL DIGITAL AUDIO OUT terminal.
≥To output audio from a device connected with an HDMI cable, set “Digital Audio Output” to “HDMI and Optical” in the Setup menu.
≥Depending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable.
≥If recording to the HDD or a
If you do not intend to copy the title to a
≥You cannot switch the audio in the following cases.
≥The amplifier is connected using an optical digital cable or an HDMI cable. You cannot switch the audio if “Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio cables.
≥There are discs for which audio cannot be changed because of how the disc was created.
64
38
45
—
—
—
65
—
63
—
64
63
16, 17,
64
—
RQT8881
75