Panasonic DMR-EH575 operating instructions Test by turning on the television and changing channels

Manufacturer and Code No.

Brand	Code	Brand	Code
Panasonic	01/02/03/04	METZ	05/28
AIWA	35	MITSUBISHI	05/19/20/47
AKAI	27/30	MIVAR	24
BEJING	33	NEC	36
BEKO	05/71/72/73/	NOBLEX	33
	74
BENQ	58/59	NOKIA	25/26/27/
			60/61
BP	09	NORDMENDE	10
BRANDT	10/15	OLEVIA	45
BUSH	05	ONWA	30/39/70
CENTREX	66	ORION	05
CHANGHONG	69	PEONY	46/69
CURTIS	05	PHILCO	41/48/64
DAEWOO	64/65	PHILIPS	05/06/46
DESMET	05	PHONOLA	05
DUAL	05	PIONEER	37/38
ELEMIS	05	PROVIEW	52
FERGUSON	10/34	PYE	05
FINLUX	61	RADIOLA	05
FISHER	21	SABA	10
FUJITSU	53	SALORA	26
FUNAI	63/67	SAMSUNG	32/42/43/
			65/68
GOLDSTAR	05/50/51	SANSUI	05
GOODMANS	05	SANYO	21/54/55/56
GRADIENTE	36	SCHNEIDER	05/29/30
GRUNDIG	09	SEG	05/69/75/
			76/77/78
HIKONA	52	SELECO	05/25
HITACHI	05/22/23/40/	SHARP	18
	41
INNO HIT	05	SIEMENS	09
IRRADIO	30	SINUDYNE	05
ITT	25	SONY	08
JINGXING	49	TCL	31/33/66/
			67/69
JVC	17/30/39/70	TELEFUNKEN	10/11/12/
			13/14
KDS	52	TEVION	52
KOLIN	45	TEX ONDA	52
KONKA	62	THOMSON	10/15/44
LG	05/50/51	TOSHIBA	16/57
LOEWE	07/46	WHITE	05
		WESTINGHOUSE
MAG	52	YAMAHA	18/41

2 Test by turning on the television and changing channels.

≥Repeat the procedure until you find the code that allows correct operation.

≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

[Note]

≥If your television brand has more than one code listed, select the one that allows correct operation.

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

Use “DVD 1”, the factory set code, under normal circumstances.				control
1	While stopped
				remote
2	Press [3, 4] to select “To Others”
	Press [FUNCTION MENU].
	and press [OK].			and
4	Press [3, 4] to select “Others” and			television
3	Press [3, 4] to select “Setup” and
	press [OK].
5	press [1].			your
	Press [3, 4] to select “Remote			matchto
6	Press [3, 4] to select the code (“DVD
	Control” and press [OK].
	1”, “DVD 2” or “DVD 3”) and press			up
	[OK].			Set
		Setup	Remote Control
			Press “￿” and “OK” together
		Tuning	for more than 5 seconds on the remote
		Disc	control.
		Picture

To change the code on the remote control

7 While pressing [OK], press and hold the numbered button ([1], [2] or [3]) for more than 5 seconds.

8 Press [OK].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (➡ step 7).

[Note]

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1

(➡ step 7).

To return to the previous screen

Press [RETURN].

To exit the screen

Press [EXIT].

RQT8881

25