Panasonic DMR-E55 warranty Specifications, Maintenance

Page 39

Specifications

Recording system: DVD Video Recording format (DVD-RAM), DVD-Video format (DVD-R)

Optical pick-up:System with 1 lens, 2 integration units (658 nm wavelength for DVDs, 795 nm wavelength for CDs)

Recordable discs:12 cm (5S) 4.7 GB DVD-RAM discs 12 cm (5S) 9.4 GB DVD-RAM discs 8 cm (3S) 2.8 GB DVD-RAM discs

12cm (5S) 4.7 GB DVD-R discs (for General Ver. 2.0)

8 cm (3S) 1.4 GB DVD-R discs (for General Ver. 2.0)

12 cm (5\) 4.7 GB DVD-R discs (for General Ver. 2.0/4M–SPEED DVD-R Revision 1.0)

Recording time:

Max. 8 hours (using 4.7 GB disc)

 

XP: 60 minutes

 

SP: 120 minutes

 

LP: 240 minutes

 

EP: 360 minutes or 480 minutes

Discs played:

12 cm (5S) 4.7 GB DVD-RAM discs

 

12 cm (5S) 9.4 GB DVD-RAM discs

 

8 cm (3S) 2.8 GB DVD-RAM discs

12cm (5S) 4.7 GB DVD-R discs (for General Ver. 2.0)

8 cm (3S) 1.4 GB DVD-R discs (for General Ver. 2.0)

12 cm (5\) 4.7 GB DVD-R discs (for General Ver. 2.0/4M–SPEED DVD-R Revision 1.0)

DVD-VIDEO discs DVD-Audio discs CD-Audio discs (CD-DA) Video CD discs

CD-R/CD-RW discs (CD-DA, Video CD, MP3 formatted discs)

Video system

 

 

 

TV system:

NTSC system, 525 lines, 60 fields

Recording system:

MPEG2 (Hybrid VBR)

Input:

LINE (pin jack)C3,

1.0

Vp-p; 75 j

 

S connectorC3

Y: 1.0 Vp-p; 75 j

 

 

C: 0.286 Vp-p; 75 j

Output:

LINE (pin jack)C1,

1.0

Vp-p; 75 j

 

S connectorC1

Y: 1.0 Vp-p; 75 j

 

 

C: 0.286 Vp-p; 75 j

Component video output (480P/480i):

Y: 1.0 Vp-p; 75 j

 

 

PB: 0.7 Vp-p; 75 j

 

 

PR: 0.7 Vp-p; 75 j

Antenna reception input:TV Channel:

2ch–69ch, 75 j

 

CATV Channel:

1ch–125ch, 75 j

Maintenance

The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

pNever use alcohol, paint thinner or benzine to clean this unit. pBefore using chemically treated cloth, read the instructions that

came with the cloth carefully.

Audio system

 

 

 

 

Recording system:

 

 

 

Dolby Digital

Input:

 

 

LINE (pin jack)C3

 

 

Reference input: 309 mVrms

 

 

FS: 2 Vrms (1 kHz, 0 dB)

 

 

Input impedance: 47 kj

Output:

 

 

LINE (pin jack)C1

 

 

Reference output: 309 mVrms

 

 

FS: 2 Vrms (1 kHz, 0 dB)

 

 

Output impedance: 1 kj

 

 

(Load impedance: 10 kj)

Number of channels:

 

Recording:

2 channels

 

 

Playback:

 

2 channels

Other input/output connectors:

 

 

 

 

Digital audio optical output connector

Operating temperature range:

5 QC–40 QC (41 QF–104 QF)

Operating humidity range:

10 %–80 % RH (no condensation)

Clock unit:

Quartz-controlled 12-hour digital display

LASER Specification

 

 

 

 

Class I LASER Product

 

 

 

 

Wave length:

 

 

 

795 nm 658 nm

Laser power:

 

 

 

 

No hazardous radiation is emitted with the safety protection

Power supply

 

 

 

 

[For\U.S.A.\and\Canada]

 

 

 

AC 120 V, 60 Hz

[For\units\with\PX\printed\on\the\outer\packaging]

 

 

 

 

AC 110 –240 V, 50/60 Hz

Power consumption:

 

 

 

25 W

Dimensions:

Approx. 430 (W)M79 (H)M274 (D) mm

 

[Approx.1615/16S(W)M31/8S(H)M1013/16S(D)]

 

 

(excluding protrusions)

Mass:

 

Approx. 3.3 kg (7.28 lbs)

 

 

Power consumption in standby mode:

approx. 2.9 W

 

 

 

 

 

[Note]

Specifications are subject to change without notice. Mass and dimensions are approximate.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.

Use the DVD-RAM/PD lens cleaner (LF-K123LCA1) about once every year, depending on frequency of use and the operating environment. Read the lens cleaner’s instructions carefully before use.

Reference

RQT7301

39

Image 39 Contents
Example Warranty can be found onLighted CANDLES, on the Unit FCC NoteFollowing Applies only in the U.S.A With NEWSPAPERS, TABLECLOTHS, CURTAINS, and Similar ItemsUseful features Table of contents Use AccessoriesRemote control BatteriesMain unit Remote controlPower button POWER /I Control reference guideWhen the unit is not to be used for a long time Before moving the unit, ensure the disc tray is emptyHeat can damage the unit Component Video OUT terminal Connecting a television and VCR75jcoaxial cable Video OUT terminalConnecting a cable TV box/satellite receiver If the antenna connector doesn’t matchConnection Optical Connecting an amplifier or system componentWhen connecting Amplifier’s rear panelPress Enter Press DVD PowerPress To select Antenna To select ChannelPress To select the channel VCR PlusK guide channel settingsCH Setting and press Enter Press To select VCR PlusTPress To select Channel and press Channel captionsPress , to select the item and press Enter Press Setup To select TV ScreenWhen the following indicator appears on the unit’s display Selecting television typeDisc information Discs you can use for recording and play 12 cm/8 cmDisc handling Press q REC to start recording Recording television programsPress OPEN/CLOSE to open Tray and insert a disc Press 9 CH to select the channelRecording modes and approximate recording times Playing while you are recordingSelecting audio to record Press , , , to select Start and press Enter Flexible RecordingPress F Rec Recording from a video cassette recorderPress the numbered buttons to enter VCR PlusK number Timer recordingUsing VCR PlusK number to make timer recordings Press VCR PlusTPress PROG/CHECK Manually programming timerTimer recording RecordingsTo change a program To exit the timer recording listTo put the unit on timer recording standby Check, change or delete a programPress Direct Navigator When a menu screen appears on the televisionPlaying discs Selecting recorded programs titles to playCM Skip Operations during playSkipping the specified Time Time SlipChanging audio during play Editing operations during playPress To select a group Press Enter Using menus to play MP3Using the tree screen to find a group Press TOP MenuPress Display Using on-screen menusCommon procedures Disc menu-Setting disc contentMPEG-DNR Play menu-Change play sequenceVideo menu-Change picture quality Audio menu-Change sound effectEditing titles/chapters Editing titles/chapters and playingChapters Chapter operations Title operationsCreating play lists Creating, editing and playing play listsAdd Editing and playing play lists/chaptersPress SUB MENU, then Select the operation and press Play list operationsPress To select Disc Setting and press Enter Disc settingSelect First play Disc NameDisc Protection Format discEntering text Show Enter Name screenPress w SET Functions window Functions window and Status messages Status messages Press StatusSummary of settings Changing the unit’s settingsScreen Tabs Menus Options Underlined items are the factory presetsAudio DisplayPress To select Manual Clock Setting and press Enter Clock settingsPress Setup To select Set Up Press To select Time Zone Adjust and press EnterMaintenance SpecificationsGlossary PCM DTS Frequently asked questionsError messages On the televisionOn the unit’s display Following do not indicate a problem with this unit Troubleshooting guideTroubleshooting guide Product information Product ServicePanasonic DVD Recorder Limited Warranty Limited Warranty only for U.S.APanasonic Canada Inc Limited Warranty only for CanadaWarranty Service If YOU Ship the Product to a ServicentreCuando el aparato no se utilice durante mucho tiempo Instalación básicaConexión de un televisor y videograbadora Cable coaxial de75 jSintonización automática al enchufar Ajuste de canales guía VCR PlusKSelección del tipo de televisor Grabación de programas de televisión Pulse 9 CH para seleccionar el canalReproducción mientras usted está grabando Reproducción de discos Pulse PlayOperaciones durante la reproducción Index Page Page Page Page Page Page Page