Panasonic DMR-E20 warranty Accessories, FCC Note, Refer Servicing to Qualified Service Personnel

Page 2

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.

Getting started

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORM- ANCE OF PROCEDURES OTHER THAN THOSE SPECI- FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EX- POSE THIS APPARATUS TO RAIN, MOIS- TURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE AP- PARATUS.

CAUTION:

TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FUL- LY INSERT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the ap- pliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter- ference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures:

³Reorient or relocate the receiving antenna.

³Increase the separation between the equipment and receiver.

³Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

³Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded inter- face cables when connecting to peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s au- thority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Do not disassemble.

Do not service.

Ne Pas Démonter.

Réservé Au Personnel Autorisé.

Nicht auseinandernehmen.

Keine Reparatur oder

Wartung erlaubt.

DANGER

VISIBLE OR INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

 

ATTENTION

RAYONNEMENT LASER VISIBLE OU INVISIBLE EN CAS

 

D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU.

VORSICHT

SICHTBARE ODER UNSICHTBARE LASERSTRAHLUNG,WENN

VARNING

ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

SYNLIG ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA

 

DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Inside of product)

RQT6035

Accessories

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.

(Only for U.S.A.)

To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com/store). (Only for Canada)

To order accessories, call the dealer from whom you have made your purchase.

¸ Remote control

1

¸ Batteries

2

¸ AC power supply cord

1

(N2QAKB000010)

 

for remote control

 

(RJA0065-A)

 

¸ Audio/Video cable

1

¸ 75 - coaxial cable

1

Note

 

(VJA0788-D)

 

(VJA1013)

 

The included AC power supply cord is for

 

 

 

 

use with this unit only.

 

 

 

 

 

Do not use it with other equipment.

 

Image 2
Contents Servicenter list and warranty can be found on pages 103 Warranty can be found onFCC Note AccessoriesRefer Servicing to Qualified Service Personnel User memo Model NumberSerial Number A. only Product Registration CardTable of contents Features Play-only discs DiscsDiscs you can use for recording and play Discs that cannot be playedAfter finalizing… Audio format logosBefore finalizing… Recording to DVD-RMain unit Remote controlControl reference guide Opening the front panelUnit’s display Center circle e.g. DVD-RAMSet up steps Follow these steps to connect and set-up this unitConnecting a cable TV box Using play lists to edit programsUsing VCR Plusr codes Manual programming Using on-screen menu icons Changing the unit’s settings»B Use Remote control»A Batteries Do notTelevision operation Refer to the chart below for the codePress and hold TV, Power ê For your televisionAntenna and television connections When you have finished connecting the unitConserving power Basic connectionB P R Video OUT terminalComponent Video OUT terminal Video cable Not includedPress Enter Plug-in Auto TuningPress ê, Power to turn the unit on ³CATV Mode Band Stations received by cable Plug-in Auto Tuning³TV Mode Band Stations received by Airwaves Channel planPress the numbered buttons to select Channel settingsUsing the remote control to Add and delete channels ChannelVCR Plus r guide Channel settingsChannel settings Press ActionTo end the setting If you make a mistakeUse the joystick 2, 1 to select TV Screen tab Selecting TV screenType To return to the previous screenTo stop play a Auto power-offPress 1, Play To pause play» stopped it Resume Function Starting play from where youTo cancel the resume function Press º, Stop»B Slow-motion play »A Fast forward and rewind-SEARCHPress 6, SLOW/SEARCH or »C Frame-by-frame viewingPress the numbered buttons to select the item »A SkippingPress , Skip or 9, Skip During play or while pausedRecording television programs Press ´, REC to start recordingPress ´, REC to select the recording time To cancel» One Touch Recording Specify a time to stop recording To show the time remaining until recording fin Ishes CPress TOP MENU, Direct NAVI- Gator Playing while you are recording»B Simultaneous rec and play Use the joystick 3, 4 to select a program and press EnterPress Time Slip While recording or timer recordingReviewing the recorded images While recording Time Slip To continue to show both the recording and play ImagesAbout the top window Using the top windowUsing the top window Press TOP Window to show the top windowTop window icons IconItems Discs Pages » Selecting an amount of time to Skip-Time Slip Convenient features» Skipping a minute forward CM skip »B A-B repeat play »A Repeat playUse the joystick 3 If the Video CD has playback controlAudio during television reception Changing audioPress Audio to select the audio type ³While receiving SAP broadcasts When using DVD-RTo change the audio type ³During playPress Marker Write at the point you want to mark When selecting markers 11 AboveMarking places to play again Use the joystick 2, 1 to select a marker numberUse the joystick 2, 1 to select the next asterisk ¢ When marking positions 11To mark points using the marker icon Press Enter at the point you wantProgram play Press the numbered buttons to select the trackEnjoying virtual surround » sound effects V.S.S To cancel random play»A Random play Press V.S.SPress Display Using on-screen menu iconsCommon procedures Use the joystick 3, 4 to select the menuIcons for disc information ContentIcon Content IconUsing on-screen menu icons Icons for unit informationPress VCR Plusr Using VCR Plusr codes to makeTimer recording Press the numbered buttons to enterFlexible recording mode FR Press ê, PowerTimer recording »A standby To put the unit on timer recordingTimer recording setting screen from on Press Enter when you have finished making changesTo change the timer recording program ³CHANNEL Channel number and caption ³DATE !?Manually programming Unit to make timer recordingPress Enter when you have finished programming the timer Press PROG/CHECK» program To delete a timer recordingTimer recording To continue programming To end programming»A To check programs Releasing the unit from timer StandbyPress ê, POWER, then º, Stop within 5 seconds Select To skip unwanted partsInput Enter Title Disc settingAbout Disc Setting Use the joystick 3, 4 to select Enter Title and press EnterEnter Title Disc settingUse the joystick 3, 4, 2, 1 to select SET and press Enter To correct a characterTo stop partway through Disc ProtectionUse the joystick 2, 1 to select Yes and press Enter DiscProtection When you press EnterReleasing disc Protection isUse the joystick 3, 4 to select Format and press Enter ³Switch DVD, TV to DVD ³Insert the disc you want to formatFormat Use the joystick 2, 1 to select Start and press EnterTo stop finalizing Finalize-Creating DVD-VideoUse Joystick Select Finalize and press Enter To clear the program list Using the direct navigatorSelecting programs to play Program list appearsAbout the program list Use the joystick 3, 4, 2, 1 to Erasing programsPress TOP Window Select Direct NavigatorEntering and editing program TitlesPadlock mark appears Protecting programsProtection Releasing program Padlock mark disappearsChecking program contents Shorten Segment Erasing parts of a programShorten Segment Use the joystick 2, 1 to select Erase and press Enter Press Return or select Cancel and press Enter in stepUse the joystick 3, 4 to select Exit and press Enter To erase another part of the same programSelect Play List and press Displaying play listsUse the joystick 3, 4, 2, 1 to To clear the play list screenTo specify another scene Creating play listsList and press Enter To stop play list play Playing play listsUse the joystick 3, 4 Select Play List ³Insert a disc you created play lists onPlay Scenes Playing play list scenesEditing play list scenes To stop scene playTo add other scenes Use the joystick 3, 4 to select Edit Scenes and press EnterEdit Scenes Adding scenes to a play listUse the joystick 2, 1 to select Re-edit and press Enter Use the joystick 2, 1 to selectMove and press Enter To move another sceneTo erase other scene # Use the joystick 2, 1 to select Erase and press EnterTo re-edit another scene Erasing a scene from a play listErasing a play list Copying play listsUse the joystick 2, 1 to select Copy and press Enter PL Copy# Enter the title Use the joystick 3, 4 to select PL Erase and press EnterTitling play lists PL EraseChecking play list contents Enjoying Catv broadcasts Enjoying more powerful soundExpanding your home theater system You cannot »A Connecting a cable TV boxWith a cable TV box You can You cannot Connecting a home satellite system Dishnetwork/DSSWith two cable boxes To enjoy Dolby Pro Logic Connecting to a digital »B amplifier or system!? componentConnecting an analog » amplifier or system component Other playback equipment »D Connecting a video cassette recorderVideo cable Connect to the video and audio output terminalsIf there are two twin leads If it is a twin leadIf there is a twin lead and a coaxial cable If it is a screw & plug type terminal³Switch DVD, TV to DVD ³Change the code on the main unit Main menus Menus Options Changing the unit’s settingsSummary of settings Audio TV Settings for DVD-VideoTV Settings for DVD-RAM Range Compression DVD-VDolby Digital onlyLanguage code list When you are finished Option and press EnterEntering a password Digital outputAuto Clock Setting Clock SettingsTo stop auto clock setting Press ActionTime Zonedstminutej Use the joystick To select Manual Clock Setting and pressItems change as follows MONTH-----DAY-----YEAR-----HOUR Time Zone EstcstmstpstasthstClock Settings screen reappears Time Zone AdjustSet Up TV TV broadcast 2CH-69CH Catv Catv broadcast 1CH-125CH Use the joystick 3, 4 to select TV or Catv and press EnterAntenna System Screen shown in reappearsUse the joystick 2, 1 to select To stop auto channel settingAuto Channel Setting Use the joystick 2, 1 to select Set Up tabUse the joystick 3, 4 to Select Channel Settings Press You can choose from the following captionsRepeat this step to enter the other characters Repeat steps , , and ! as necessaryPress Status to change the information displayed On-screen displays» Changing the information Displayed »B Display examplesSpecifications Laser SpecificationGlossary Maintenance Disc handling Self-diagnosisReference pages are shown as black circled numbers F Error messagesError messages Causes and solutions Picture Troubleshooting guidePower SoundRemote control PlayRecording and timer recording Product ServiceTroubleshooting guide Timer program remains even after recording finishesLimited Warranty San Gabriel Industrial Park, Carolina, Puerto RicoCustomer Name Model Number Panasonic Canada IncPanasonic DVD Recorder One 1 year, parts and labour Date of Purchase Dealer’s Name Address Phone NumberServicenter List only for U.S.A Factory ServicentersPulse Action para finalizar el ajuste Conexiones de antena y televisorSelección del tipo de la pantalla del televisor Grabación de programas de TV Reproducción de discosPulse 1, Play Index