SFM1
Wood Stud Location
1.Using a stud finder, locate the 16” or 24” stud centers behind the wall.
2.Once found, make a pencil mark on the center of the wood studs (Figure 9). NOTE: The wall plates have three 16” and 12” mounting slot positions.
Stud Finder
Wooden Studs
16"
Wooden Studs behind the Wall Structure
Figure 9. Locating the Wooden Stud
3.Measure from the floor to the desired viewing height and mark the wall (Figure 10).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
16"
Measure and Mark the Desired Viewing Height on the Wall
Figure 130. Measuring the Height
Page 10 | Installation Manual |