Sony EX420, EX720 Setting up the Internet connection, Wireless LAN, Type Wired LAN , Type

Page 21

Setting up the Internet connection

Using the network feature you can connect the TV to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.

Wireless LAN

Secure Wireless LAN?

NO

k Type 3

 

 

 

YES m

 

For security purpose, “WPS (PIN)” provides a PIN code for your router. PIN code is renewed every time you select “WPS (PIN)”.

1 Press HOME, then select > “Network” > “Network Set-up”.

2 Select “Wireless Set-up”.

3 Select “WPS (Push Button)” for Push Button method or “WPS (PIN)” for PIN method.

~

Button name of the WPS may differ depending on the router (e.g. AOSS button).

4 Follow the instructions on the set-up screen.

Network

Do you use a wireless LAN router compatible with Wi-Fi Protected Set-up (WPS)?

YES m

Type 1*

Wired LAN , Type 4

NO

kType 2

Type 2: Secured network without Wi-Fi protected Set-up (WPS)

To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be required. If you do not know them, consult the instruction manual of your router.

Setup

*Type 1 is easier to set up if your router has an automatic setting button, e.g. Air Station One-Touch Secure System (AOSS). Most of the latest routers have this function. Check your router.

Type 1: Follow the configuration for “Secured Network with Wi-Fi Protected Set-up (WPS)”. Type 2: Follow the configuration for “Secured Network without Wi-Fi Protected Set-up (WPS)”.

Type 3: Follow the configuration for “Unsecured Network with Any Type of Wireless LAN Router”.

Type 4: Follow the configuration for “Wired network set-up”.

Type 1: Secured network with Wi-Fi protected Set-up (WPS)

The WPS standard makes security of a wireless home network as straightforward as pressing the WPS button on the wireless LAN router. Before setting up a wireless LAN, check the location of the WPS button on the router and verify how to use it.

1 Press HOME, then select > “Network” > “Network Set-up”.

2 Select “Wireless Set-up”.

3 Select “Scan”, then select a network from the list of scanned wireless networks.

4 Follow the instructions on the set-up screen.

~

If you use WPS for network set-up, the security settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network.

In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status.

(Continued) 21 GB

Image 21
Contents LCD Trademark information IntroductionPrecautions Location of the identification labelDisposal of the TV set Australian model only Table of Contents Contents of the i-Manual Inserting batteries into the remote Checking the accessoriesExcept KDL-60EX720 Attaching the Table-Top StandDetaching the Table-Top Stand from the TV Adjusting the viewing angle of the TVEnsure that there are no objects in front of the TV Connecting an antenna/cable and VCR Connecting an antenna/ cable/VCRConnecting an antenna/cable 10 GBConnecting audio/video devices Organizing the AC power cord/Bundling the cablesPreventing the TV from toppling over 12 GB Performing the initial set- up13 GB Watching the TV 14 GBTo use Digital Electronic Programme Guide Parts and controls of the remote 15 GBSelecting various functions and settings Home Menu To select items in the Home menu e.g., selecting Settings16 GB Home menu map 17 GBDisplaying Operating Instructions i-Manual 18 GBTo select items in the i-Manual Description of the i-Manual screen 19 GBTo use the bookmark To memorise the last displayedPreparing a wired network Preparing a wireless LAN20 GB Type 1 Secured network with Wi-Fi protected Set-up WPS Setting up the Internet connectionWireless LAN Type Wired LAN , TypeType 4 Wired network set-up Adjusting the server display settingsIf you cannot connect to the Internet 22 GBIf you cannot connect to your home network 23 GBTroubleshooting Condition Explanation/Solution24 GB System Specifications26 GB Optional accessoriesInstalling the Accessories Wall-Mount Bracket To CustomersTo Sony Dealers and Contractors When installing the base bracket on the wall for SU-WL50B 28 GBSU-WL50B and SU-WL100 29 GB Screw and Hook locations diagram/table 30 GBScrew location Hook location SU-WL100 Hook location TV installation dimensions table32 GB Installation/Set-up Safety InformationAC power cord Prohibited UsageWhen not in use If the following problems Occur34 GB Broken pieces