Safety Information
Installation/Set-up
Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.
Installation
•The TV set should be installed near an easily accessible AC power outlet.
•Place the TV set on a stable, level surface to avoid it from falling down and cause personal injury or damage to the TV.
•Only qualified service personnel should carry out wall installations.
•For safety reasons, it is strongly recommended that you use Sony accessories, including:
–
•Be sure to use the screws supplied with the
The diameter and length of the screws differ depending on the
Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
8 mm - 12 mm
Screw (supplied with the |
Mounting Hook |
Hook attachment on rear of TV set
Transporting
•Before transporting the TV set, disconnect all cables.
•Two or more people are needed to transport a large TV set.
•When transporting the TV set by hand, hold it as shown below. Do not put stress on the LCD panel and the frame around the screen.
•When transporting the TV set, do not subject it to jolts or excessive vibration.
•When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.
Ventilation
•Never cover the ventilation holes or insert anything in the cabinet.
•Leave space around the TV set as shown below.
•It is strongly recommended that you use a Sony
Installed on the wall
30 cm
10 cm 10 cm
10 cm Leave at least this space around the set.
Installed with stand
30 cm
10 cm |
|
|
|
|
| 10 cm |
|
|
|
|
| 6 cm | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Leave at least this space around the set.
•To ensure proper ventilation and prevent the collection of dirt or dust:
–Do not lay the TV set flat, install upside down, backwards, or sideways.
–Do not place the TV set on a shelf, rug, bed or in a closet.
–Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.
–Do not install the TV set as shown below.
Air circulation is blocked.
Wall | Wall |
AC power cord
Handle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:
–Use only Sony supplied AC power cords, not those of other brands.
–Insert the plug fully into the AC power outlet.
–Operate the TV set on a
–When wiring cables, be sure to unplug the AC power cord for your safety and take care not to catch your feet on the cables.
–Disconnect the AC power cord from the AC power outlet before working on or moving the TV set.
–Keep the AC power cord away from heat sources.
–Unplug the AC power plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.
Notes
•Do not use the supplied AC power cord on any other equipment.
•Do not pinch, bend, or twist the AC power cord excessively. The core conductors may be exposed or broken.
•Do not modify the AC power cord.
•Do not put anything heavy on the AC power cord.
•Do not pull on the AC power cord itself when disconnecting the AC power cord.
•Do not connect too many appliances to the same AC power outlet.
•Do not use a poor fitting AC power outlet.
Prohibited Usage
Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.
Location:
•Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.
•If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulfur, etc.
•For best picture quality, do not expose the screen to direct illumination or sunlight.
•Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor colour. Should this occur, allow moisture to evaporate completely before powering the TV on.