Sony EX720 manual Adjusting the viewing angle of the TV, Detaching the Table-Top Stand from the TV

For KDL-60EX720

1 Align with the two dowels of the Table- Top Stand, and gently place the TV, checking the f mark is facing the front.

Neck

2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench.

*

Head

*3 N·m {30 kgf·cm}

~

•Set the torque setting to approximately 3 N·m {30 kgf·cm}.

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. For KDL-60EX720, be sure to remove the screws for detaching the head when the Table-Top Stand is not attached to the TV.

~

•Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.

•When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.

•To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

2:Adjusting the viewing angle of the TV

This TV can be adjusted within the angles as illustrated.

Angle adjustment (Swivel) (except KDL-60EX720/ KDL-26/22EX42x)

~

•When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over.

BExcept KDL-32EX420 (Australia model)

20°	20°
20°	20°

BKDL-32EX420 (Australia model)

15° 15°

15° 15°

8 GB