Type 3: Unsecured network with any type of wireless LAN router
To set up a wireless LAN, SSID (wireless network name) will be required.
1 Press HOME, then select 
> “Network” > “Network
2
3 Select “Scan”, then select a network from the list of scanned wireless networks.
4 Follow the instructions on the set-up screen.
~
•Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure.
Type 4: Wired network set-up
Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router.
1 Press HOME, then select 
> “Network” > “Network
2
3 Select “Auto” to set the IP Address and proxy server automatically, or “Custom” to set them manually.
4 Follow the instructions on the set-up screen.
Viewing the network status
You can confirm your network status.
1 Press HOME, then select 
> “Network” > “Network
2 Select “View Network Status”.
If you cannot connect to the Internet
Use the diagnosis to check possible causes for network connection failures, and settings.
1 Press HOME, then select 
> “Network” > “Network
2 Select “View Network Status”.
3 Select “Check Connection”.
This may take several minutes. You cannot cancel the diagnosis after selecting “Check Connection”.
Adjusting the server display settings
You can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed in the Home Menu automatically.
1 Press HOME, then select 
> “Network” > “Home Network Setup”.
2 Select “Server Display Settings”.
3 Select the server you want to display on the Home Menu, and adjust the settings.