Sylvania SRCD223, SRCD227 Manual Clock Setting, To Change Clock Setting, Date, Setting Time

MANUAL CLOCK SETTING

Make sure ...

•TV/DVD/VHS power must be turned on.

In the example below, the clock is to be set to:
DATE	May 7th, 2002
SETTING TIME	5:40PM

1Select “SETTING CLOCK”

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to “SETTING CLOCK”. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

6 Select the hour	– MANUAL CLOCK SET –
Press the Arrow K or L button until	MONTH DAY		YEAR
your desired hour appears.	0 5	/ 0 7	TUE 2 0 0 2
(Example: 5, PM)	HOUR	MINUTE
Then, press the Arrow B button.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –

2 Select “MANUAL CLOCK	– SETTING CLOCK –
SET”	AUTO CLOCK		[ON]
Press the Arrow K or L button to	AUTO CLOCK CH [AUTO]
point to “MANUAL CLOCK SET”. B MANUAL CLOCK SET
Then, press the Arrow B button.	D.S.T.		[OFF]
3 Select the month	– MANUAL CLOCK SET –
Press the Arrow K or L button until	MONTH DAY		YEAR
your desired month appears.	0 5 / – – – – – – – – –
(Example: May → 05)	HOUR	MINUTE
Then, press the Arrow B button.	– –	: – –	– –
4 Select the day	– MANUAL CLOCK SET –
Press the Arrow K or L button until	MONTH DAY		YEAR
your desired day appears.	0 5 / 0 7 – – – – – – –
(Example: 7th → 07)	HOUR	MINUTE
Then, press the Arrow B button.	– –	: – –	– –
5 Select the year	– MANUAL CLOCK SET –
Press the Arrow K or L button until
	MONTH DAY		YEAR
your desired year appears.
	0 5	/ 0 7	TUE 2 0 0 2
(Example: 2002)	HOUR	MINUTE
Then, press the Arrow B button.	– –	: – –	– –

Press the Arrow K or L button until	MONTH DAY		YEAR
the desired minute appears.	0 5	/ 0 7	TUE 2 0 0 2
(Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM

8 Start the clock

5:40 PM

Press the SETUP button on the remote control.

Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the

remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the Arrow

Bor s button.

3)Enter correct numbers using the Arrow K or L button.

4)Press the SETUP button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the Arrow B or s button to turn [OFF] this function. Then you can manually adjust the clock.

- 18 - EN

1C29