SOFTWARE UPDATE VIA OAD
Press 
to turn on or off the automatic software update.
OAD SOFTWARE MANUAL SCAN
Press 
to immediately search for new software to download.
SOFTWARE UPDATE VIA USB
Press 
to load new software for the receiver from a storage device connected to the USB socket on the back of the receiver. The device must be formatted with the FAT32 file system. Please refer to the documentation from your operating system for more information.
We recommended you use a USB stick as many Hard Disks require more power than a single USB socket can provide. If using such a hard disk, please ensure it has an external power supply.
RESTORE FACTORY DEFAULT
Press 
to revert all the receiver settings to what they were when you first got your receiver and to start the installation procedure described in the Preparation section of this guide.
You must enter the lock PIN, and then confirm in another menu, to start the process because it will delete all channels, favourite channels, favourite channel list names, and the receiver configuration.
31