2Preparation
This section explains how to set up your Plaza HD•T2 to receive Freeview channels.
THE AERIAL
To receive Freeview, you must connect your Plaza HD•T2 receiver to an appropriate TV aerial that has been correctly installed. If your aerial is unable to provide adequate signal, it may need to be realigned. Please consult a professional.
CONNECTING YOUR RECEIVER
Place your Plaza HD•T2 receiver on a firm, level surface close to the television, a mains electricity socket, and the cable from the aerial. (See Appendix A – Safety.)
Connect the cable from your aerial to the ANT IN socket at the back of the Plaza HD•T2. If you also want to use your television’s internal tuner, you can optionally connect a cable from the ANT OUT socket at the back of the Plaza HD•T2 to the appropriate input on your television. Please note that to conserve energy, by default this output is disabled when the Plaza HD•T2 is in standby. You can enable it in the System section of the Setup menu (please see page 30).
10