MANUAL (STATIC)
If your broadband modem/router is not compatible with DHCP (Dynamic Host Configuration Protocol), or you wish to manually
configure the Network Configuration and IP address, press 
to select the Network Configuration option.
Use the 
or 
buttons to change the configuration to “Static” and for each of the addresses in turn (IP Address, Subnet Mask, Router
Address, and DNS Address) press 
to highlight the address and then the red button to edit the address.
Highlight each of the four “octets” that is to be changed, enter the number required using the number buttons, and press 
to confirm that address. When all four addresses have been set
correctly, press 
to set the configuration and return to the system menu page.
33