Sylvania SRPD442 owner manual Attaching a Wall Mount Bracket Sold Separately

ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)

The following is a description of the method for attaching a wall mount to the plasma display. When performing this operation, refer to the instruction manual included with the wall mount kit.

#CAUTION

•Any damage caused by incorrectly attempting to mount the plasma display is not covered under the terms of the manufacturers warranty.

2

Plasma Display rear

1	1
	Stand

BRACKET (SOLD SEPARATELY)

1 Turn the plasma display over and place it screen-first onto a table which has a soft cloth draped over it.

Place the plasma display in a way so that the stands hang over the edge of the table.

NOTE:

•Make sure to use a table which can support the weight of the plasma display, and is larger than the plasma display.

•Make sure the table is in a stable location.

2 Remove the stands from the plasma display.

Unscrew the M5 screws indicated by 1 , and remove the left and right stands.

NOTE:

•The screws and stands you have removed are necessary for reattachment at a later date. Make sure to keep them in a safe place.

3 Attach the left and right TV rails to the plasma display using the M8 screws included with the wall mount kit.

2indicates the position of the screw holes on the plasma display

NOTE:

•Only use the screw holes indicated by 2 for mounting the plasma display.

•For instructions on how to attach the TV rails, refer to the instruction manual included with the mount wall kit.

4 Attach the plasma display to the wall.

NOTE:

•Refer to the instruction manual included with the wall mount when securing the plasma display to the wall.

CONNECTING THE POWER CABLE / ATTACHING A WALL MOUNT

25