MAINTENANCE
CLEANING THE PLASMA DISPLAY
Always unplug the plasma display from the AC outlet before cleaning.
Clean the case of the plasma display with a soft cloth which has been wet and wrung dry.
If the screen of the plasma display is dirty or dusty, wipe it clean with a soft cloth.
NOTE
Never use a solvent, alcohol, or any other abrasive liquid to clean the plasma display.
Always make sure the area around vents on the plas- ma display is clear and clean. Failure to do this may result in fire or cause the plasma display to fail prema- turely.
WARNING
Preventing Image Burn on the plasma display
Fixed images displayed on the plasma display for an extended period of several hours may cause uneven pixel aging causing damage to the plasma display. The screensaver mode helps reduce this phenomenon, but in general you should to try avoid displaying fixed images for extended periods on the plasma display.
Images of high luminance displayed on the plasma display for more than 60 seconds may cause lin- gering images to remain on the screen. These images will automatically disappear, but may take time depending on the luminance of the images and how long they were displayed on the screen.
26
