Sylvania LC427SSX owner manual 5Channel List 5Manual Register, Using CH K/L, Press Setup to exit

English

5Channel List	5Manual Register
The channels selected here can be skipped when selecting the channels	This function lets you add the channels that were not added by
using [CH K/L].	the autoscan due to the receptible condition at the initial setting.
Those channels can still be selected with [the Number buttons].

INTRODUCTION

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

P CTURE

SOUND

CHANNEL

DETAIL

LANGUAGE

USB

3Use [Cursor K/L] to select “Channel List”, then press [ENTER].

P CTURE	Channel
	Autoscan
SOUND	Channel List
CHANNEL	Manual Register
	Antenna
DETAIL
LANGUAGE
USB

4Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

P CTURE	Channel Listi
	Highlight channe s for Ch			DTV	6
SOUND	Up/Down key selection				27
CHANNEL				DTV	8
					9
DETAIL				DTV	48
					58
LANGUAGE				DTV	67
USB	Ch Select		Watch/Skip	BACK
		E TER		Back

•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5Press [SETUP] to exit.

	PREPARATION
1 Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

CHANNEL			WATCHING
PICTURE
SOUND
DETAIL			TV
LANGUAGE
USB			OPTIONAL
3 Use [Cursor K/L] to select “Manual Register”, then
press [ENTER].			SETTING
PICTURE	Channel
	Autoscan
SOUND	Channel List
CHANNEL	Manual Register		TROUBLESHOOTING
	Antenna
DETA L
LANGUAGE
USB
4 Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].			INFORMATION
		11
PICTURE	Manual Register
	For analog channels select a	Reg ster
SOUND	channel to register using number
	keys
CHANNEL	For digital channe s you must
	perform Autoscan function
DETA L
LANGUAGE
USB		BACK
	Ch Change	Back

5Press [SETUP] to exit.

Note:

•If setup completes successfully, “Added to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

19

EN