PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the
1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2)Press the POWER button to turn on the TV.
3)Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▼ or ▲ button to point to "LANGUAGE".
5) Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS] by using the VOL(ume) Y or X button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
[ADD/DELETE FUNCTION]
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▼ or ▲ button to point to "CHANNEL SET UP". Then press the VOL(ume) X button.
3)Press the VOL(ume) X button so that "ADD/DELETE CH" is selected.
4)Use the CH(annel) ▼ or ▲ button to select the channel you wish to put into memory or to erase from memory.
Perform "ADD/DELETE CH" function while this display appears on the screen.
●Press the VOL(ume) Y or X button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) Y or X button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
- TV SET UP -
PICTURE
CHANNEL SET UP
| |
LANGUAGE | [ENGLISH] |
CAPTION | [OFF] |
TV SOUND | [MAIN] |
BACK LIGHT | [BRIGHT] |
- CHANNEL SET UP - ADD/DELETE CH (TV) AUTO PRESET CH
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears on the TV screen.
3) Press the CH(annel) ▼ or ▲ button to point to "CHANNEL SET UP". Then press the VOL(ume) X button.
4) Press the CH(annel) ▼ or ▲ button to point to "AUTO PRESET CH". Then press the VOL(ume) X button.
The tuner scans and memorizes all active channels in your area.
●The TV distinguishes between standard TV channels and cable (CATV) channels.
●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. When there is no signal to ANT in jack, "NO TV SIGNAL" will appears. In this case, please check the antenna connections, then try again the auto preset channel.
●When you press the CH(annel) ▼ or ▲ button after selecting AUTO PRESET CH, the tuner will stop at the memorized channels only.
●The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO PRESET CH action again when reception conditions are better.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
Menu |
|
|
|
|
| To show the status, press the |
Selection | MAIN | MONO | SAP |
| ||
Type of |
| DISPLAY button on the remote | ||||
broadcast |
|
|
|
|
| control. |
Regular |
| |||||
|
| |||||
Stereo | STEREO |
|
|
|
| SAP: Second Audio Program, |
MONO | STEREO |
| which means your program, can | |||
broadcast |
| |||||
|
|
|
|
|
| also be received in a second lan- |
SAP | MAIN | MAIN | SAP |
| ||
| guage or sometimes a radio station. | |||||
|
|
|
|
|
|
|
[To Select STEREO, MONO or SAP in Stereo broadcast]
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▼ or ▲ button to point to "TV SOUND".
3)Press the VOL(ume) Y or X button to select your desired stereo mode. ([MAIN], [MONO] or [SAP])
: Press the VOL(ume) Y or X button.
- TV SET UP - | - TV SET UP - | - TV SET UP - | |||
PICTURE |
| PICTURE |
| PICTURE |
|
CHANNEL SET UP | CHANNEL SET UP | CHANNEL SET UP | |||
|
|
| |||
LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] |
CAPTION | [OFF] | CAPTION | [OFF] | CAPTION | [OFF] |
TV SOUND | [MAIN] | TV SOUND | [MONO] | TV SOUND | [SAP] |
BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] |
OPERATIONS
WATCHING A TV PROGRAM
PICTURE ADJUSTMENT
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▼ or ▲ button.
3)Adjust the volume to the desired listening level using the VOL(ume) Y or X button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn off after a set time period.
1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2)You may change the sleep time by pressing the SLEEP
1)Press the MENU button so that the menu dis- play appears on the TV screen.
2)Press the CH(annel) ▼ or ▲ button to point “PICTURE”. Then press the VOL(ume) X button.
3)Select the feature you wish to adjust with the CH(annel) ▼ or ▲ button and adjust it with the VOL(ume) Y or X button.
: Press the CH(annel) ▼ or ▲ button.
| VOL(ume) | VOL(ume) | |
|
|
| |
BRIGHTNESS | to decrease | to increase | |
brightness | brightness | ||
| |||
|
|
| |
CONTRAST | to decrease | to increase | |
contrast | contrast | ||
| |||
COLOR | to pale | to brilliant | |
|
|
| |
TINT | to purple | to green | |
SHARPNESS | to soft | to clear | |
|
|
|
button on the remote control repeatedly. The timer can be set up to 90 minutes. 10 minutes each time the SLEEP button is
pressed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet or when you have a power failure,
the sleep time will be lost.
SLEEP 10 MINUTE
|
| BRIGHTNESS |
|
|
|
|
| CONTRAST |
|
|
|
|
|
|
| COLOR |
|
|
|
|
|
|
|
|
|
|
| TINT |
|
| SHARPNESS | ||||||||||||||||||||||||||||||||||||||||||||||||
- |
|
|
|
|
|
|
|
|
|
|
|
|
|
| + | - |
|
|
|
|
|
|
|
|
|
|
|
|
|
| + | - |
|
|
|
|
|
|
|
|
|
|
|
|
|
| + | - |
|
|
|
|
|
|
|
|
|
|
|
|
|
| + | - |
|
|
|
|
|
|
|
|
|
|
|
|
|
| + |
Note:
●In the above steps, the picture adjustment display will disappear from the TV screen automati- cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) X button so that "PICTURE" is selected. Then press the CH(annel) ▼ or ▲ button repeatedly until the display returns to the screen.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- | 1) | Press the MENU button so that the menu | |||||||||
grams, movies, news and prerecorded tapes, |
| display appears on the TV screen. |
| ||||||||
etc. with either a dialogue caption or text dis- | 2) | Press the CH(annel) ▼ or ▲ button to point | |||||||||
play added to the program. |
|
|
|
| to "CAPTION". |
|
|
| |||
|
|
|
|
|
| 3) | Press the VOL(ume) Y or X button to | ||||
|
|
|
|
|
|
| select the mode you wish. |
|
| ||
|
|
|
|
|
| 4) | When done, press the MENU button to exit | ||||
| : Press the VOL(ume) Y or X button. |
| |||||||||
|
|
| the menu. |
|
|
| |||||
|
|
|
|
|
|
|
|
|
| ||
- TV SET UP - | - TV SET UP - | - TV SET UP - |
| - TV SET UP - | - TV SET UP - | ||||||
PICTURE |
| PICTURE |
| PICTURE |
|
| PICTURE |
| PICTURE |
| |
CHANNEL SET UP | CHANNEL SET UP | CHANNEL SET UP |
| CHANNEL SET UP | CHANNEL SET UP | ||||||
|
|
|
|
| |||||||
LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | ||
CAPTION | [OFF] | CAPTION | [CAPTION1] | CAPTION | [CAPTION2] | CAPTION | [TEXT1] | CAPTION | [TEXT2] | ||
TV SOUND | [MAIN] | TV SOUND | [MAIN] | TV SOUND | [MAIN] |
| TV SOUND | [MAIN] | TV SOUND | [MAIN] | |
BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] | BACK LIGHT | [BRIGHT] |
BACK LIGHT SELECTION
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▼ or ▲ button to point to "BACK LIGHT".
3)Press the VOL(ume) Y or X button to select the mode you wish.
4)When done, press the MENU button to exit the menu.
: Press the VOL(ume) Y or X button.
- TV SET UP - | - TV SET UP - | - TV SET UP - | |||
PICTURE |
| PICTURE |
| PICTURE |
|
CHANNEL SET UP | CHANNEL SET UP | CHANNEL SET UP | |||
|
|
| |||
LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] | LANGUAGE | [ENGLISH] |
CAPTION | [OFF] | CAPTION | [OFF] | CAPTION | [OFF] |
TV SOUND | [MAIN] | TV SOUND | [MAIN] | TV SOUND | [MAIN] |
BACK LIGHT | [BRIGHT] | BACK LIGHT | [NORMAL] | BACK LIGHT | [DARK] |