SET UP FOR USE
Getting started
1
Connect the power cord to a standard AC outlet. NOTE: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until channel number or "TV" appears on the screen.
LANGUAGE SELECTION
If you want to change the language of the
1 | CHANNEL SET | |
Press the SETUP button so that the | LANGUAGE [ENGLISH] | |
ESPAÑOL | ||
setup display appears on the TV | FRANÇAIS | |
screen. | ||
CAPTION [OFF] | ||
|
| |
2 | CHANNEL SET | |
Press the Arrow K or L button to | LANGUAGE [ENGLISH] | |
ESPAÑOL | ||
point to "LANGUAGE". | FRANÇAIS | |
| CAPTION [OFF] |
3
Select "ENGLISH", "ESPAÑOL" = Spanish or "FRANÇAIS" = French by using the Arrow s or B button.
4
Press the SETUP button to exit the setup. NOTE: An
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
2
Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button.
3
Press the Arrow K or L button to point to "AUTO MEMO". Then, press the Arrow B button.
The tuner scans and memorizes all active channels in your area.
•The TV distinguishes between standard TV chan- nels and cable channels.
•When AUTO MEMO action is completed, the low- est memorized channel reappears on the screen.
•When you press the Arrow K or L button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.
•The TV/VCR may memorize TV channels as CATV channels if reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display appears on the TV screen.
2)Press the Arrow K or L button to point to "CHANNEL SET". Then, press the Arrow B button.
3)Press the Arrow K or L button to point to "ADD/DELETE". Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory. NOTE: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" func- tion while this display appears on the screen.
•Press the Arrow s or B button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
•Press the Arrow s or B button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.
5)Press the SETUP button to exit the setup.
1
Press the SETUP button so that the setup display appears on the TV screen.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
CAPTION [OFF]
– 15 –
EN