Sylvania 6620LDG owner manual External Connection

EXTERNAL CONNECTION

AUDIO	(CADUDOAIOXIAL)
	L UT
	IGITAO
	O2
	VIDE		R
VIDEO2	AU	DIO	L			T
	CPMP		ONEN
			Pb
			Y
			Pr
				R
	AUDI		O	L
VIDEO1
		S-VIDEO
	O1		VID	EO
	VIDE
				ANT
			PHON		E
	HEAD

You can connect this unit to your own Audio/Video equipment.

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner’s Manuals for the equipment to be connected to the unit.

NOTE

When you use the external input, select “VIDEO1” or “VIDEO2” by pressing [SELECT]. (Refer to page 11.)

•To use the VIDEO1 input jacks, select “VIDEO1”.

•To use the VIDEO2 input jacks, select “VIDEO2”.

- VIDEO1 INPUT

V

		R
AU	DIO
		L
IDE	O1		O
	VIDE
S-VI		DEO

ex.	Use this connection if your own A/V equipment (e.g.
Audio Cable (OUT)	VCR) has Video output and Audio out jacks. When

using S-Video cable, better picture is available.

Video Cable (OUT)

OR

Video Cassette

S-Video Cable (OUT) Recorder

NOTE

•If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.

•If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.

- VIDEO2 INPUT

		ex.
V I D E O 2	Audio Cable	(OUT)
R
AUDIO		Video Camera
L
COMPONENT	Component
Y
Pb	Video Cable	(OUT)
Pr

Video Game

Use this connection if your own A/V equipment (e.g. video camera, video game) has Component Video output (Y, Pb, Pr) jacks. You can enjoy the best pic- ture with this connection.

- AUDIO OUTPUT

To coaxial digital audio input jack

DIGITAL
AUD	IO OUT
(COA		XIAL)

You can enjoy DVD sound with more presence by connecting digital audio equipment such as Dolby Digital decoder.

Home Audio System

Dolby Digital decoder

NOTE

•The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 29.)

•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 29.)

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

EN - 10 -