Sylvania SSC719B SET UP for USE, Channel SET UP for First Time, Deleting or Adding Channel

Page 15

TV/VCR SECTION

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1Plug in the TV/DVD/VHS power cord

Plug the TV/DVD/VHS power cord into a standard AC outlet.

NOTE:

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2Turn on the TV/DVD/VHS

Press the POWER button to turn on the TV/DVD/VHS.

1Select “CHANNEL SET UP”

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to “CHANNEL SET UP”. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

3Select “ENGLISH” or “ESPAÑOL” or

“FRANÇAIS”

– SET UP –

 

Select “ENGLISH” or

B LANGUAGE

 

“ESPAÑOL”=Spanish or

[ENGLISH] ESP

FRA

 

 

“FRANÇAIS” =French using the

AUTO PRESET

 

 

 

Arrow B or s button. “[ ]” indi-

 

 

cate the selected language.

 

 

 

 

 

4 Begin auto preset

– SET UP –

 

Press the Arrow K or L button to

 

LANGUAGE

 

point to “AUTO PRESET”.

 

[ENGLISH] ESP

FRA

Then press the Arrow B button.

B AUTO PRESET

 

The tuner scans and memorizes all

 

 

active channels in your area.

 

 

NOTES:

•The TV/DVD/VHS distinguishes between standard TV channels and cable channels.

•If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 15.

•The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception condsitions are better.

5After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.

2 Select “ADD/DELETE CH”

– CHANNEL SET UP –

Press the Arrow K or L button to

B ADD / DELETE CH (TV)

point to “ADD/DELETE CH”.

AUTO PRESET

 

Press the Arrow B button.

3Enter the desired channel number

Press the Arrow K or L button until your desired channel number

appears. (You can also use the num-

08

 

ber buttons or the CHANNEL K/L

ADD / DELETE

button to enter it) (Example: CH8)

 

4Delete (or add) it from (into) memory

Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory.

•To delete another channel, repeat steps [3] and [4].

•If you press the Arrow B or s button again, the channel is memorized again.

5Exit the channel setup mode

Added channel: Light blue.

Deleted channel: Light red.

Press the SETUP button on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

- 15 -

EN

1F12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SSC719B Supplied AccessoriesImportant Safeguards S2 8 9 8 a RADIO-TV Interference PrecautionsLaser Safety Important Copyright InformationAvoid the Hazards Electrical Shock and Fire LocationwarningTable of Contents TV/VCR FeaturesDVD Operating Controls and Functions Activates program playback or random playback mode Press to adjust the picturePress to enter or exit the TV menu or DVD setup mode Resets a settingCable Without CONVERTER/ Descrambler BOX Preparation for USEANTENNA/CABLE Connection VHF/UHF Separate AntennasTo Record a SCRAMBLED/UNSCRAM- Bled Channel Connecting to External Input JacksInstalling the Batteries External Input ModeConnecting to AN Amplifier Equipped with Digital Connecting to a Stereo System for DVDOr DTS Decoder for DVD Connecting to a Dolby Digital DecoderSET UP for USE Channel SET UP for First TimeDeleting or Adding Channel Selecting the Language Channel SET UP AgainTo Cancel the DAYLIGHT-SAVING Time DAYLIGHT-SAVING TimeAuto Clock Setting Clock SET UP Auto / ManualManual Clock Setting To Change Clock SettingPlease Note Picture Control TV OperationWatching a TV Program DegaussingTo Cancel the Closed Caption System When the Closed Caption Mode is onClosed Caption System When you select TV-PG, TV-14 or TV-MA Chip SET UPTV Rating SET UP When you select TV-Y7Change Access Code Mpaa Rating SET UPSelection Checking the Selected MTS ModeMTS RECORDING/MONITOR Mode STEREO/SAPTo Select Hifi Mode To Select Mono Mode Selecting the MTS SystemTo Select STEREO, SAP, or Mono Video Cassette Playback Rental Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Special PlaybackSearch Zero ReturnTime Search Auto REWIND-EJECT Special FeaturesIndex Search Real Time Tape CounterRecording Normal RecordingSkipping Unwanted Scenes During Recording 100 Minutes Pushes Display Recording lengthNormal recording 030 MinutesAutomatic Timer Recording TimerTimer Program Extension To Cancel AN Automatic Timer RecordingTo Correct a Program Hints for Automatic Timer Recording Sleep TimerAuto Return OFF mode Counter mode Clock mode Clock/Counter mode On Screen DisplayCable Channel Designations DVD Playable DiscsDisc Types Following discs can be played back on this DVD playerCalling UP a Menu Screen During Playback Using the DVD MenusUsing the Title Menu Playing a DVD Video Or AN Audio CDPausing Playback or Displaying a Still Picture Stepping Through FramesFast FORWARD/REVERSE Starting from a Desired Track Slow MotionStarting from a Desired Time Count Playing from a Desired Title or Chapter¡The selected section Will be Repeat Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repeat SelectedZoom Playback Changing the Audio Language or Sound Mode SettingsChanging the Camera Angle Multi-Angle Pictures Changing the Subtitle LanguageChanging the ON-SCREEN Display Playback Setup Window CD¡The setup screen appears Language Settings¡The setup screen will appear Display SettingsAudio Settings If YOU Forget the Password Parental LockControl Levels Language Code List Troubleshooting Guide Problem Corrective ActionAdjust picture controls Normal time available for editing the captions Closed Caption Problem Possible RemedyTV/DVD Symptom Cause RemedyDisc Handling MaintenanceOther Specifications SpecificationsGeneral Specifications Electrical SpecificationsMemo Consulte la figura 3 de la página Controles DE Operación Y FuncionesConsulte la figura 1 de la página Consulte la figura 2 de la páginaRepone un ajuste Púlselo para introducir el número deseadoHace una pausa en la operación del disco o la cinta Visualiza el menú de títulosConexión a UN Sistema Preparación Para LA UtilizaciónInstalación DE LAS Pilas Conexión a Tomas DE Entrada ExternaConsulte la figura 8 de la página Para DVDAjuste DEL Reloj Preparación DE Canales POR Primera VEZReproducción DE UN DVD DE Vídeo O UN CD DE Audio ¡La alimentación se conectará¡La bandeja de carga del disco se abrirá Memo Memo TD354UE DurationTel 0EMN01870
Top Page Image Contents