RESUMING PLAYBACK FROM 2 Press the PLAY button to return to normal
THE POINT WHERE | playback speed. |
| |
PLAYBACK STOPPED |
|
DVD
CD
1Press the STOP button during playback.
¡Playback will stop, and then appear the resuming message at
Press 'PLAY' to play from here
the center.To play beginning, press 'STOP' first and the 'PLAY'.
2Press the PLAY button. Playback will start from the point where the previous playback session was stopped.
Play B
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD CD
1Press the PAUSE button during playback.
¡Playback will pause, with sound | Pause F |
muted.
Notes
¡Resuming playback is not available with some discs.
¡It is possible to switch from the DVD play mode to the TV mode. Even if the power is turned off, the resume function enables to playback on from the previously interrupted point. But note that the Marker commands are not saved.
¡The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray.
2Press the PLAY button to resume playback.
Play B
STEPPING THROUGH FRAMES
DVD
FAST FORWARD/REVERSE
1Press the PAUSE/STILL button while play- back is paused.
DVD CD
¡The next picture frame is dis- played with sound muted each time the button is pressed.
Pause F
1Press and hold the g or h button for more than 1 second during playback.
¡For DVDs, pressing and more than 1 second holding | 2 Press the PLAY button to resume playback. | |
the g or h button cycles the playback speed in | ||
| ||
three steps. | Play B |
¡For audio CDs, the playback speed is ⋅16 fixed.
REV E Button | FWD D Button |
Ex2 | Dx2 |
Ex8 | Dx8 |
Ex32 | Ex32 |
– 38 – | EN |
1F12