Remote Control
RM-C205
VIDEO | SLEEP | POWER |
STATUS | TIMER | |
DISPLAY |
| INPUT |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
100+ | 0 | RETURN+ |
|
| |
MUTING |
| V CHIP |
| + |
|
| CH |
|
VOL |
| VOL |
|
| + |
CH
MENUEXIT
VCR CONTROL
CHANNEL POWER TV/VCR
REW PLAY FF
REC | STOP PAUSE |
(optional)
Remote Control Basics
•Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions.
•Press the POWER button to turn the television on or off.
•Press the CH+ and CH- buttons to scan through the channels. Tap the CH+ or CH- button to move through the channels one channel at a time.
•To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
•Press VOL+ or VOL - to raise or lower the volume. An indicator bar will appear onscreen to show you the television volume level.
•The CH+/- and VOL+/- buttons are also used to navigate JVC’s onscreen menu system.
•You can directly access specific channels using the
•For more information on remote control button features, see pages 26 to 28.
Note: You can operate the basic functions of any JVC Brand
VCR unit. Operational features include: Power On and Off, Play, Stop, Pause, Rewind, Fast Forward, Channel up and down and Record.
Changing the Batteries
Raise the latch on the remote’s back cover to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and
When batteries are installed, snap the cover back into place (until it clicks into position).
•If the remote control acts erratically, replace the batteries. Typical battery life is six months to one year. We recommend using alkaline batteries for longer battery life.
15