CONTROL LOCK OF BUTTONS AND KNOBS
You can set the CONTROL LOCK function to disable control buttons and knobs on the front panel, except for the power switch.
This function is set in the
SETTING DISPLAY OF PRESENT INPUT STATUS WHEN INPUT IS TURNED ON/OFF
This function (STATUS DISPLAY) is set in the
1While pressing the SELECT 
button, press
SELECT
the VOLUME/ENTER
button.
The <SET-UP MENU> screen appears.
＜ＳＥＴ－ＵＰ ＭＥＮＵ＞�
� |
|
ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� |
ＣＯＮＴＲＯＬ ＬＯＣＫ | ：ＯＦＦ� |
ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | ：ＯＮ� |
ＷＨＩＴＥ ＢＡＬＡＮＣＥ� |
|
ａｌｌ ｒｅｓｅｔ� |
|
ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ 
＋� ＳＥＬＥＣＴ：�
1 While pressing the
|
|
|
| ＜ＳＥＴ－ＵＰ ＭＥＮＵ＞� | |
SELECT | button, press | � |
| ||
ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� | ||||
ＣＯＮＴＲＯＬ ＬＯＣＫ | ：ＯＦＦ� | ||||
| SELECT |
|
| ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | ：ＯＮ� |
|
| ||||
the VOLUME/ENTER | ＷＨＩＴＥ ＢＡＬＡＮＣＥ� |
| |||
ａｌｌ ｒｅｓｅｔ� |
| ||||
|
| ||||
button. |
|
|
| ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：� | |
The | |||||
appears. |
|
|
|
|
|
|
|
|
|
|
|
2 Press the SELECT |
| ＜ＳＥＴ－ＵＰ ＭＥＮＵ＞� | |
button to select the | SELECT | � | ：ＯＦＦ� |
ＣＯＮＴＲＯＬ ＬＯＣＫ | |||
[CONTROL LOCK] item. | ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� | |
ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | ：ＯＮ� | ||
|
| ＷＨＩＴＥ ＢＡＬＡＮＣＥ� |
|
|
| ａｌｌ ｒｅｓｅｔ� |
|
The selection mark ( 4) moves to |
|
| |
the [CONTROL LOCK] item. | ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：� | ||
* When the | |||
displayed with the CONTROL LOCK
function turned on, the selection mark (4) appears where the [CONTROL LOCK] item is displayed. In this case, the
selection mark (4) cannot be moved to other items.
3Perform adjustment with the VOLUME/
ENTER
/
buttons.
ON : Control of front panel functions is turned off.
OFF : Control of front panel functions is turned on.
4 After adjustment is complete, press the MENU
button to exit the menu screen.
MENU
*The screen automatically disappears after about 30 seconds if the MENU button is not pressed to exit the menu screen.
Notes:
●When the CONTROL LOCK function is turned on, if control knobs or buttons on the front panel (except for the power switch) are operated, “Control lock on!” is displayed for about three seconds.
●When the
●When the CONTROL LOCK function is turned on, other menu screens cannot be displayed.
(The CONTROL LOCK function is effective from the moment it is switched “ON.”)
●Items that cannot be set or adjusted in the current input mode (INPUT SELECT) are not displayed.
2 Press the SELECT |
| ＜ＳＥＴ－ＵＰ ＭＥＮＵ＞� | ||
button to select the | SELECT | � |
| |
ＰＯＷＥＲ ＳＡＶＥ | ：ＯＮ� | |||
| ||||
| ＣＯＮＴＲＯＬ ＬＯＣＫ | ：ＯＦＦ� | ||
[STATUS DISPLAY] item. | ＳＴＡＴＵＳ ＤＩＳＰＬＡＹ | ：ＯＮ� | ||
ＷＨＩＴＥ ＢＡＬＡＮＣＥ� |
| |||
| ａｌｌ ｒｅｓｅｔ� |
The selection mark ( 4) moves to |
|
the [STATUS DISPLAY] item. | ＥＸＩＴ： ＭＥＮＵ�ＡＤＪＵＳＴ：�－ ＋� ＳＥＬＥＣＴ：� |
3 Perform adjustment with the VOLUME/
ENTER
/
buttons.
ON : The present input status is displayed when the input is changed.
OFF : The present input status is not displayed when the input is changed.
4 After adjustment is complete, press the MENU
button to exit the menu screen.
MENU
*The screen automatically disappears after about 30 seconds if the MENU button is not pressed to exit the menu screen.
Notes
Items that cannot be set or adjusted in the current input mode (INPUT SELECT) are not displayed.
<STATUS DISPLAY> Screen
●Press the INPUT SELECT
buttons to select the input. The present input status is displayed on the <STATUS DISPLAY> screen.
(Example)
INPUT A (RGB) pInput mode
49 kHz 75 Hz pFrequency (or color system or DTV format)
*The screen indication automatically disappears after about three seconds.
Note:
The displayed contents are the same as in “DISPLAY OF PRESENT INPUT STATUS” on page 14. Refer to that section for more details. Also, refer to “Notes” and “Connection Between Input Mode Display and Frequency (or Color System or DTV Format) Display” on page 14.
17