JVC DT-V2000SU manual Specifications

SPECIFICATIONS

 Type : DTV monitor

Picture Tube : 20” measured diagonally, in-line gun, 90° deflection, dot-trio type (dot-trio pitch

0.26mm)

Effective Screen

Size	: Width	: 16” (406.4 mm)
	Height	: 12” (304.8 mm)
	Diagonal : 20” (508 mm)

Scanning

Frequency : H : 15 k/31 k — 65 kHz

V: 50 — 100 Hz

Video Band : DC — 60 MHz (RGB)

Horizontal

Resolution : NTSC : 600 TV lines

1080i : 900 TV lines

Input Terminals

INPUT A : RGB/COMPO. multi-input

1 line, BNC connector x 6 (bridge connection possible, auto termination)

Analog RGB signal

Audio Output : 1 W (monaural)

Built-In

Speaker : 3-1/8” (8 cm) round x 1

Impedance of 8

Environmental

Conditions : Operating temperature:

0 – 40 °C (32 – 104 °F) Operating humidity:

20 — 80 % (non-condensing)

Power

Requirements: 120 V AC, 60 Hz

Power Consumption : 1.6 A

Dimensions

(W x H x D) : 18-3/4” x 16-1/8” x 20-7/8”

(476 x 407.5 x 529 mm)

Weight : 69.6 lbs (31.6 k˝)

Accessory : AC power cord [7.87 ft (2.4 m)] x 1

R, B : 0.7 Vp-p, 75

G: 0.7 Vp-p, 75

G on sync : 1.0 Vp-p, 75 (negative sync) Y/R-Y/B-Y component signal

Y: 1.0 Vp-p, 75 (negative sync) R-Y/B-Y : 0.7 Vp-p, 75

DTV-format signal

[480i (ITU-R BT. 601-4), 480p (SMPTE 293M)]

Y: 1.0 Vp-p, 75 (negative sync) PB, PR : 0.7 Vp-p, 75

[720p (SMPTE 296M), 1080i (SMPTE 274M)]

Y: 1.0 Vp-p, 75 (3-value sync) PB, PR : 0.7 Vp-p, 75

External

[Dimensions]

<Front View>

*1: Front panel dimensions

Unit: inch (mm)

18-3/4 (476)

*1	(314.8)
12-1/2

16-1/2 (416.4)*1

ABC

PHASE CHROMA BRIGHT CONTRAST

ON

OFF

MENU VOLUME/ENTER SELECT INPUT SELECT POWER

16-1/8 (407.5)

Synchronization

: EXT SYNC (HD/Cs, VD) input

1 line, BNC connector x 4 (bridge connection possible, auto termination)

Horizontal/composite synchronization signal

HD : 1 — 4 Vp-p, 75

Cs : 1 — 4 Vp-p, 75

Vertical synchronization signal

VD : 1 — 4 Vp-p, 75

INPUT B : VIDEO input

1 line, BNC connector x 2 (bridge connection possible, auto termination)

1.0Vp-p, 75 (negative sync) Y/C input

1 line, mini-DIN 4-pin connector x 1 Y : 1.0 Vp-p, 75 (negative sync) C : 0.286 Vp-p (burst signal), 75

* (When both terminals are connected at the same time, the Y/C terminal is given priority.)

INPUT C : PC (RGB) input

1 line, D-sub 3-row 15-pin connector x 1 * exclusively for computer signal input

(SYNC termination: 330 )

AUDIO INPUT : 1 line, RCA pin x 1 (monaural ) 0.5 Vrms, high-impedance

Remote

Input/Output : 1 line, DIN 8-pin connector x 1

External input select control of 3 bits (signal of 2 bits, ENABLE signal of 1 bit) Input status output of 2 bits

15-1/8 (382.8) 1/8 (3)

<Side View>

16-7/8 (479)

1/4	4-1/4	5-3/8		5-1/8
					1/8 (3)
(6.3)	(105)	(135)		(128.5)
			20-7/8 (529)

*Illustrations and pictures used in this manual have been exaggerated, abbreviated or compounded for explanatory purposes only. The appearance of the actual product may differ slightly.

*Dimensions and weight are approximate.

*E. & O.E. Design and specifications subject to change without notice.

22