JVC AV-14F3 Test point Ad justment part Description Remote, Secam Control unit, BL Adjust, Bl Ack

Page 26

AV-14F3/AV-1435 AV-1435EE/AV-1435TEE AV-14FMT3/AV-1438 AV-14FMG3/AV- 14FMG3B

Item

Measuring instrument

Test point

Ad justment part

Description

Ad justment		Remote		7.SECAM
of SECAM		control unit		BL ADJUST
of SECAM				BL ADJUST
BL ACK		Signal
		Signal
OFFSET		generator

KEY ASSIGNMENT OF REMOTE CONTROL UNIT

COLOUR
ON
1	2	3
COLOUR
OFF
4	5	6
7	8	9

[Method of adjustment using measuring instrument]

1.Input a SECAM full field colour bar signal.

2.Enter the SERVICE MENU.

3.Select 2. V/C from SERVICE MENU.

4.Select 7. SECAM BL ADJUST with MENU ▼/▲ key.

5.Set the initial setting value with the MENU - / + key.

6.Switch the ①key (colour OFF) and ②key (colour ON) on the remote control and make sure that there is no colour on the black and white screen.

7.If the black and white screen is not best with the initial setting value, make fine adjustment until you get the best black and white screen.

8.While watching the screen, adjust the value to be the same colour between ON & OFF by ten key on the remote control unit.

9.Press the DISPLAY key twice to return to the normal screen.

26

No. 52026

Image 26

Contents Contents AV-14F3 / AV-1435 AV-14FMT3 / AV-1438 SpecificationsEnts Safety Precautions Features Functions Rear TerminalRemote Control Unit Model Name Main Difference ListPart Name Specific Service Instructions AV-14FMG3/AV- 14FMG3B System CONSTANT-Ⅱ KEY Assignment of Remote Control Unit Service MenuSystem CONSTANT-Ⅰ System CONSTANT-ⅢUser Setting Values Setting of System Constant SETSetting value Setting item Setting contents Setting item Setting valueInitial Setting Value of Service Menu PAL Secam PresetSound System Do Not Adjust Setting item NT SCLocations of Front Panel Buttons and LAM PS Replacement of IC301 if V/C DecoderProcedures Adjustment Items Service AdjustmentsBefore Starting Service Adjustment Measuring Instrument and FixturesBasic Operation of Service Menu KEY Assignment of Remote Control UnitSetup Tour Method of settingC, 3.DEF and 4.VSM Preset Should be OFFService Menu Flow Chart Upperfocus Adjustment LocationsTP-E CRT Earth Wire Braided Assy LowerscreenFocus Adjustment AdjustmentsB1 Power Supply If Circuit AdjustmentAGC Delay PointPoint MatsushitaVideo / Chroma Circuit Adjustment Ad justment Remote Method of adjustment without measuring instrumentSUB Bright SUBColour Ⅱ Method of adjustment using measuring instrumentSUB Generator Oscillo TP-E #Socket TintCRT Secam Control unit BL AdjustTest point Ad justment part Description Remote BL ACKDeflection Circuit Adjustment PositionScurve VSM Preset SettingVER. Scurve TOP# P/C Magnets Purity / Convergence AdjustmentPurity Adjustment Static Convergence Adjustment Dynamic Convergence AdjustmentSoldering Iron Replacement of Chip ComponentReplacement Steps No.52026