JVC AV-1435 Method of adjustment using measuring instrument, SUB Generator, Colour Ⅱ, Scope

AV-14F3/AV-1435
AV-1435EE/AV-1435TEE
AV-14FMT3/AV-1438
AV-14FMG3/AV- 14FMG3B
Item		Measuring	Test point	Ad justment part		Description
	instrument
Ad justment	Signal		TP-47G/R	5.	COLOUR	[Method of adjustment using measuring instrument]
of SUB	generator
COLOUR Ⅱ	Oscillo-		TP-E (#)	PAL COLOUR		1.Input a PAL full field colour bar signal (75% white).
			[CRT SOCKET
	scope					2.Enter the SERVICE MENU.
			PWB]
	Remote					3.Select 2. V/C from SERVICE MENU.
	control unit					4.Select 5. COLOUR with the MENU ▼/▲ key.
						5.Set the initial setting value of PAL COLOUR with the MENU
						- / + key.
						6.Connect the oscilloscope between TP-47G/R and TP-E ( #).
				B		7.Adjust PAL COLOUR to bring the value of (A) in the illustration
			R			to +12V(W-G). (Voltage value between (W) and (G))
			Mg
				(－)
	W			0V
		Y	(A)	(＋)
		Cy
			G

SECAM COLOUR	1.Input a SECAM full field colour bar signal (75% white).
	2.Set the initial setting value of SECAM COLOUR with the MENU
	- / + key.
	3.Adjust SECAM COLOUR to bring the value of (A) in the
	illustration to +10V(W-G). (Voltage value between (W) and (G))

NTSC 3.58 COLOUR 1.Input a NTSC 3.58 full field colour bar signal (75% white).

2.Set the initial setting value of NTSC 3.58 COLOUR with the MENU - / + key.

3.Adjust NTSC 3.58 COLOUR to bring the value of (A) in the illustration to +10V(W-G). (Voltage value between (W) and (G))

NTSC 4.43 COLOUR

When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values .

24 No. 52026