JVC AV-14A10,AV-14F10, AV-20N10, AV-21A10, AV-21D10, AV-21F10 Manual Channel Preset, TV channel

Page 7

Preparation

■Manual Channel Preset

You can manually preset the desired TV channels to the desired channels.

1.Press MENU / to display the MENU 3 menu, then select MANUAL CH PRESET.

2.Press MENU –/+.

The sub-menu is displayed.

• The channel No. is displayed as a PR No.

MENU 3

AUTO CH PRESET

MANUAL CH PRESET

LANGUAGE ENGLISH

SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

3.Press MENU –/+ to select the channel number.

		Channel
4.		No.
4.	Press VOLUME –/+ to start searching for
	the TV channel.
	or	is displayed on the screen.

	MANUAL
	FINE
	SKIP				NO
	SOUND SYSTEM		B/G
	EXIT
	SELECT	BY	PR 1 VL
	PROGRAM	BY -+	EXIT BY
	SEARCH	BY VOL-+	DISPLAY

When a TV channel is received, the or display goes out, and the TV station is preset to the currently selected channel No.

•If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the TV channel you want to preset.

•To stop the Manual Channel Preset function, press any button other than the VOLUME

–/+ button.

If the picture is not clear:

Use the Fine function to fine-tune the TV station.

1.Press MENU / to select FINE.

2.Hold VOLUME –/+ down to fine-tune the TV station so that the best image is displayed on screen.

or indicates that the TV station is being fine-tuned.

5.Press MENU / to select SOUND SYSTEM.

6.Press VOLUME –/+ to select the appropriate sound system.

•For the sound systems in each country or region, refer to the table “Broadcasting systems” on page 19.

MANUAL
FINE
SKIP		NO
SOUND SYSTEM		B/G
EXIT
SELECT	BY	PR 3 VL
PROGRAM	BY -+	EXIT BY
FINE	BY VOL-+	DISPLAY


MANUAL
FINE
SKIP		NO
SOUND SYSTEM		B/G
EXIT
SELECT	BY	PR 3 VL
PROGRAM	BY -+	EXIT BY
CHANGE	BY VOL-+	DISPLAY

7.Press MENU / to select MANUAL.

8.Repeat steps 3 to 7 if you want to preset another TV station to a channel.

9. Press DISPLAY to turn the display off.	7

Image 7

Contents Instructions Locations # Volume -/+ buttonsConnecting the aerial and VCR Connecting the aerial and external devicesConnecting the aerial and VCR Connecting the aerialHeadphones Connecting other external devicesInserting batteries into the remote control Connecting the power cordTurning your TV on You can select the language for the on-screen display Presetting TV stationsAuto Channel Preset Selecting the on-screen languageTV channel Manual Channel PresetPress Volume -/+ to start searching for Press Menu -/+ to select the channel numberSkip Press Menu / to select Manual CH Preset Press Menu -/+Press Menu / to select Skip Viewing Images from an External Device Basic operationIf the colour is abnormal If the sound is abnormalSound System Remote control buttons and functionsPicture Mode Colour SystemMuting Off TimerDisplay Eco SensorReturn + Channel ScanInput Using the TV’s menusOn Timer When the time set for the On Timer function is reachedPress Menu / to display the Menu 1 menu, then select VNR Child LockAuto Shutoff VNR Video Noise ReductionBlue Back Picture AdjustmentTo cancel the Blue Back function, select OFF You can adjust the picture as you likeAV-14F10/AV-20N10/AV-21F10 Using the button on the TVAV-21D10 AV-21A10To turn the sub-menu display off Press Volume -/+ to turn the menu display offBasic operation Operating menusProblem Check/Action TroubleshootingImportant Review all the instructions in this manual Broadcasting Systems SpecificationsArea Country or Region System Colour Sound  2001 Victor Company of JAPAN, Limited